A knitted scarf is a stylish accessory that will save you from the cold and will complement any look, adding nobility and elegance. You can crochet any model you like. Using knitting patterns, you can create an exclusive item that will fully meet all requirements.
Scarf made of thick yarn
A crocheted scarf made of thick yarn looks very beautiful and neat. To make the product comfortable and stylish, it is important to choose the right pattern. Below is a description of knitting. As a decoration, you can make fringe or pompoms along the edges of the product.
You will need:
- thick yarn - 200 g;
- hook;
- scissors.
Instructions for making:
- Make a slip knot.
- Cast on 40 air loops (ch).
- In the 6th loop from the hook, make a double crochet (dc). Continue working until the end of the row.
- Cast on 2 ch from 1 loop, knit a dc into it, repeat until the end of the row.
- Skip 2 loops, knit a dc, make 2 ch, knit a dc into it, repeat until the end of the row.
- Knit dc in 1 space of 2 ch of the previous row. Turn the product over and make 3 ch.
- From 1 loop on the hook, knit 2 ch. Make a dc. In the same gap, make a ss. Make a rapport until the end of the row.
- Work 1 dc into each gap of 2 ch in the bottom row.
- Knit the product, repeating the rows. At the end of each, make 3 ch turns.
- Close the last row.
Made of mohair
A crochet scarf (the knitting pattern allows you to create a beautiful product that will warm you in the cold season) made of mohair is distinguished by its airiness and lightness, while retaining heat perfectly. The accessory will become a wardrobe decoration, and thanks to the fluffy yarn, it will warm you in the cold winter.
Materials:
- hook (select the number based on the thickness of the thread);
- mohair yarn – 100 g.
Step by step instructions:
- Row 1: Form a chain of 27 ch.
- Row 2. Make 3 air loops for lifting (vpp). In each loop, knit a dc.
- Row 3. Make 3 VP (done only in this row). Place the thread on the hook and pull it through 6 sts. Secure the resulting lush column (PST) with VP. Similarly, knit the 2nd part of the ear, in 1 st of the previous row. Step back 2 sts of the bottom row. Knit the 2nd ear in 3 sts of 2 rows. Consecutively knit the ears in each 3 sts.
- Row 4. To form the spike of row 4, insert the hook into the arch of the 1st spike, pull the picked up thread through the st on the hook. Knit the spikelet as in row 3.
- Knit the following rows without changes. Finish knitting at the required length. The last row should be 27 dc. (3 ch * in the center of the spikelet dc, 2 dc knit in the arch located between the spikelets).
- The ends of the scarf are tied with a 3-st stitch. Connect to the base with a sl-st. Pull out the loop to form 2 sts and so on until the end of the row.
Openwork scarf
Following the detailed description of a beautiful openwork crochet scarf, you can make an airy and light product that can be worn even in winter if you knit it from wool or semi-wool yarn. You can knit a demi-season model from cotton threads. The main requirement: the yarn should be soft and pleasant to the touch.
Materials required:
- hook (select the number depending on the thickness of the thread);
- yarn.
Instructions for making:
- Start work by dialing VP. You need to dial a number of VP that is a multiple of 8.
- Make a ch and knit a sc. Knit a ch again. Next, skip 3 ch, and in the 4th knit 3 dc, then ch again and in it knit 3 dc. Make a ch. Skip 3 loops and in the 4th knit a sc. Knit a ch. Continue working in this order until the end of the row.
- Start a new row by knitting 6 ch. Next, in the ch located in the space between the dc, knit a sc. Knit 3 ch and knit a dc into the sc of the lower row. Again form 3 ch and knit in the ch located between the dc of the previous row a sc. Continue working until the end of the row.
- Start a new row by knitting a ch in 1 loop of the bottom row, and knit a sc in it. Then make 3 ch and knit a dc in the sc of the bottom row. Next, form 3 ch and continue making sc and ch in the space between the dc of the previous row. Next, again form 3 ch and a dc in the sc of the bottom row. Continue until the end of the row.
- Continue working starting from row 1 to the required length. Cut the thread, hide the end.
- Complete another row of the pattern along the side of the product from which the work began, that is, from the chain stitch.
Jacquard
A crochet scarf (the knitting pattern involves alternating yarns of different colors, resulting in a pattern) can be knitted from threads of any shade. The main thing is that the color scheme matches.
When making this model, it is necessary to carefully follow the pattern so that the pattern does not get lost and you do not have to unravel the product.
Materials:
- hook No. 4;
- yarn (50% wool, 50% acrylic) of medium thickness - 250 g red;
- 25 grams each of blue, green, light green, beige, yellow, red, crimson flowers.
Knitting instructions:
- Using green thread, make a chain of 32 ch. Continue knitting with sc.
- Row 1. Knit all stitches in green.
- Row 2. Alternate 1 sc light green, 1 sc green.
- Row 3. All sc with green yarn.
- Row 4. Knit with beige threads.
- Row 5. Alternate: 2 sc yellow, 2 sc blue, 2 sc red.
- Row 6. Sc with yellow threads. Then alternate: 2 Sc blue, 2 Sc red, 2 Sc yellow yarn.
- Row 7. Knit in the following order: 2 sc blue, 2 sc red, 2 sc yellow thread.
- Row 8. Knit all sc with beige yarn.
- Row 9. 2 sc red, 2 sc raspberry, 1 sc green, 2 sc raspberry yarn. Alternate: 3 sc red, 2 sc raspberry, 1 sc green, 2 sc raspberry yarn.
- Row 10. Knit in the following order: 1 sc red, 2 sc raspberry, 1 sc green, 1 sc raspberry, 1 sc green, 2 sc raspberry.
- Row 11. Knit 2 sc with light green thread. Then alternate: 1 sc with green thread, 3 sc with light green thread.
- Row 12. Knit 1 sc in light green. Next: 1 sc in green, 3 sc in light green yarn.
- Row 13. Alternate: 1 sc with green thread, 3 sc with light green thread.
- Row 14. Knit, alternating: 1 sc yellow, 1 sc green, 5 sc blue, 1 sc green yarn.
- Row 15. Knit 2 sc with yellow, 1 with green thread. Continue, observing the following sequence: 3 sc with blue, 1 sc with green, 3 sc with yellow, 1 sc with green yarn.
- Row 16. Knit 3 sc in yellow, 1 sc in green, 1 sc in blue yarn. Continue, alternating: 1 sc in green, 5 sc in yellow, 1 sc in green, 1 sc in blue yarn.
- Row 17. Alternate 1 sc green and 3 sc light green thread.
- Row 18. Knit in the following order: 3 sc with light green yarn, 1 sc with green yarn.
- Row 19. Knit 2 sc with light green, 1 sc with green thread. Continue: 1 sc with green, 3 sc with light green yarn.
- Row 20. Knit 1 sc raspberry, 1 sc green thread. Continue: 2 sc raspberry, 1 sc red, 2 sc raspberry, 1 sc green, 1 sc raspberry, 1 sc green yarn.
- Row 21. Knit 1 sc with green thread. Next: 2 sc with raspberry, 3 sc with red, 2 sc with olive, 1 sc with green yarn.
- Row 22. Knit all sc with beige thread.
- Row 23. Alternate: 2 sc yellow, 2 sc blue, 2 sc red.
- Row 24. Knit 1 sc with red thread. Next: 2 sc yellow, 2 sc blue, 2 sc red.
- Row 25. Alternate: 2 sc red, 2 sc yellow, 2 sc blue.
- Row 26. Knit all sc with beige thread.
- Row 27. Knit all sc with light green yarn.
- Row 28. Alternate 1 sc with light green and 1 sc with green thread.
- Row 29. Knit the entire row with green yarn.
- Continue knitting with red thread.
- Row 1-2. Ch, then knit sc.
- Row 3. Ch, alternate: sc and dc.
- Row 4. Ch, alternate: dc and sc.
- Repeat 3-4 rows.
- When the product reaches a height of 74 cm, cut the thread. Knit the 2nd part in the same way.
- Sew both parts together. Tie around the perimeter with red yarn as follows: sc, in each corner loop do: sc, ch and sc. Close the row ss.
- Moisten the product and dry it on a horizontal surface.
Scarf-snood
A snood is a universal item that can be worn around the neck or as a headdress. Knitting such a model, complemented by decor, is quite simple if you strictly follow the step-by-step description. The height of the finished product is 16 cm, the length is 140 cm. These parameters can be adjusted at your discretion.
Materials:
- hook No. 5.5;
- yarn (209 m in 100 g) – 250 g;
- scissors;
- needle;
- decorative buttons – 4 pcs.
Step by step instructions:
- Form a chain of 205 ch.
- Row 1. Crochet half double crochets (hdc) into each ch, starting with the 2nd st from the hook. This technique will give you an elastic edge. Finish by crocheting a ch.
| Simple snood with fillet mesh | Voluminous snood |
 |  |
- Row 2. Knit in the base loop sc. Knit until the end of the row sc in each st of the bottom row, ch, turn the work
- Row 3. Knit sbn in each st of the bottom row, turn the work.
- Row 4. Work sc in 1 st of bottom row, *skip 1 st, continue by working pst, ch*, work from* 101 times, finish with sc, ch, turn work.
- Rows 5-7. Knit a single crochet in each st of the base of the bottom row. You get 204 sts.
- Row 8. In 1 st of the bottom row, knit sc, *skip 1 st, continue working, knitting pst, ch*, repeat from *101 times, finish with sc, ch, turn the product.
- Rows 9-25. Knit, repeating from rows 2 to 8.
- Row 26. Knit all loops with sc.
- Tie the short ends of the scarf with sc. There should be 26 sc in total.
- Cut 160 threads with sharp scissors, each 23 cm long. Make tassels, leaving 4 sts on the product, grouping 3 threads in each. Fold in half.
 |  |  |
- The resulting arc is picked up with a hook and pulled through the st. on the edge of the scarf, then the ends of the threads are threaded through the st. and tightened well. The decoration can be of different lengths.
- Sew on buttons. Fold the edges of the accessory and sew on buttons at the same distance to the product.
Crochet scarf made of square motifs
The crochet scarf (the knitting pattern of the motifs can be any) consists of lace squares, knitted separately from yarn of two colors. At the end, the motifs are connected to each other, which allows you to get a wide, beautiful accessory. The length and width of the model can be adjusted by changing the number of elements.
Materials:
- hook No. 5;
- olive and brown yarn (270 m in 50 g) - 100 g each.
 |  |
Instructions for making:
- Knit 27 brown and olive squares.
- Cast on 4 ch. Close in a circle with ss.
- Row 1. 3 ch lift, *3 ch, dc, continue from *. Finish with sc.
- Row 2. 3 ch lift from ss of the previous row, in it knit 3 dc, 2 ch, *4 dc, 2 ch, continue from *. Finish with sc.
- Row 3. Ch, sc in sc of previous row, 4 ch, *ss2n, insert hook behind work around ch 1 of circular row, 4 ch, dc2n, insert hook behind work around ch 1 of circular row, 4 ch, 1 sc, 2 ch, 1 sc, 4 ch, continue from *. Finish with sc.
- Row 4. Ch, sc, *4 ch, sc, continue from *. Finish with sc and ch.
- Row 5. Dc, sc, *4 ch, sc, 4 ch, sc, 4 dc, 4 ch, 4 dc, sc, continue from *. End with ss.
- Alternating colors, sew the squares behind the arches and groups of 4 dc so that there are 3 squares in width and 18 squares in height.
Crochet scarf with braid pattern
A classic scarf from designer Karen Hay with lush "braids" and decorated with fringe will not only keep you warm in the cold season, but will also become a stylish accessory.
You will need:
- hook No. 4.5;
- wool yarn 100 m in 50 g – 200 g.
Instructions for making:
- Cast on 25 ch.
- Row 1 (wrong side). In 4 ch from hook dc and in each next. Total 22 dc. Knit 3 ch turns.
- Row 2. Dc in 1 ch of previous row, skip 2 ch, work: insert hook twice from right side of work back and forth again around wall of loop on row below and draw yarn through 2 loops 3 times (tr dc), first around 1 skipped ch, then around 2 skipped ch, tr dc around next 2 sts, *dc in next ch, skip next 2 ch, tr dc around next 2 ch, tr dc around 1 skipped ch, then around 2 skipped ch, tr dc around next 2 ch, repeat from * 1 more time, finish with dc in last ch. This makes 3 “braids” of 6 loops. Work 3 ch turns.
- Row 3: Dc in 1 ch, skip next 2 sts, insert hook twice from back of work forwards and back again around vertical wall of loop on previous row, draw up loop and draw through 2 sts 3 times (dc2n) around next 2 sts, dc2n around 1 skipped loop, then around 2 skipped loop, dc2n around next 2 sts, *dc in next dc skip next 2 sts, dc2n around next 2 sts, dc2n in 2 skipped dc2n, dc2n in next 2 dc2n, repeat from * once, finish dc in last dc, ch 3 turns.
- Repeat rows 2 and 3 until the desired length of the product is achieved.
- Last row knit dc in each loop of the previous row. Cut the thread and hide the end.
- Cut 25.5 cm thread for fringe. Use 10 pieces to form a tassel. Tie 7 tassels at equal distances to both ends of the product.
Crochet air scarf
The product, knitted with this pattern, turns out very light and airy. Such an accessory will become a decoration and will complement the image.
Materials:
- hook No. 6;
- wool yarn – 500 g.
Knitting instructions:
- Cast on 31 ch.
- Row 1. Ch, sc, ch, *sc, 2 ch, continue from *.
- Row 2. Alternate: sc, 2 ch to end of row.
- Row 3. Sc, ch, *sc, 2 ch, continue from *.
- Row 4. Alternate: sc, 4 ch.
- Row 5: Cast on 50 ch, sc in the space between 4 ch. Continue until the end of the row.
- Row 6-8. Knit as from row 1 to row 3.
- Row 9. Knit as row 3.
- Row 10. Knit all loops in a crab-like pattern: knit sc, but in the direction from left to right.
- Row 11-13. Knit, alternating rows 2, 3 and 4.
- Continue working rows 5 through 13 until desired length is reached.
- Tie the chain of VP, with which you started knitting the product, with "crayfish step" columns, inserting the hook into the front half-loop. Then knit 1 row as follows: *back half-loop, then 4 VP, skip 2 loops of the previous row, repeat from * 9 times, finish with sc. Cut the thread, hide the end.
- Cut 80 60 cm long threads for the fringe. Connect 4 threads and secure in the arches at both ends of the scarf with a crochet hook.
Crochet scarf for a child
The crochet scarf (the knitting pattern is simple) becomes incredibly delicate and beautiful due to the decor.
 |  |
Materials:
- hook;
- soft yarn;
- needle;
- boucle yarn;
- threads.
Instructions for making:
- Cast on a chain of VP's corresponding to the width of the product.
- Knit the scarf with turning rows of dc.
- Continue working until the desired length is reached.
- Tie the scarf with a fan pattern. Attach a white thread and knit 5 dc into the loop, then knit a sc into the 3rd base loop, knit 5 dc into the next 3rd loop, skip 2 loops and knit a sc into the 3rd. Continue. Make the tie-off on the sides as follows: knit a fan under the column, skip the next column and knit a sc under the other.
- Knit the bear's head from bouclé yarn. Knit 12 dc into a slip stitch. Pull the knitting together and make a ss. In the next row, knit 2 dc into each column of the previous row. Knit the last row of the head, making increases through the loop.
- Knit ears from boucle yarn. Knit 12 dc into a slip stitch and tighten, make ss.
- Sew a head onto one end of the scarf and embroider eyes and a nose.
- On the other end, knit a paw. Knit the base in the same way as the head. Knit the paw pads from the same yarn as the scarf. In a sliding loop, make 12 dc, tighten and make a ss. Knit 3 fingers. Make 2 ch and knit 6 sc. Sew to the product.
Knitting a scarf with a crochet hook is much faster and easier than knitting. You can use different patterns to make it. Depending on the pattern, the product can be openwork or dense. Descriptions and patterns of models can be found on Internet resources and knitting magazines.
Video about knitting
Crochet scarf. Knitting patterns: