How to knit a skirt with knitting needles for beginners step by step. Schemes with descriptions

Content

Knitting a skirt is much easier than other items. The main thing is to decide on the pattern and follow the diagram exactly. To make it, you will need yarn and knitting needles. First of all, you should decide on the size, correctly calculate the required number of loops to start knitting, how many decreases or increases need to be made and where they should be located. In knitting magazines and on the Internet, you can find many step-by-step descriptions for beginner needlewomen.

Openwork model

Even a novice needlewoman can knit a light, airy skirt, an invariable attribute of a woman's summer wardrobe. This model is perfect for people of any build. The product has a waist circumference of 81 cm. The length is 56 cm.

It is necessary to prepare:

yarn – 400 g;
tape – 2 m;
knitting needles No. 3.5 and 4.

Patterns used:

Front stitch.
Garter stitch.

Pattern 1:

Row 1. Front loop (f), slip 1 st, knit the next one and pull through the slipped st (slip through), *4 f, yarn over, f, yarn over, 4 f, 3 together f, repeat from *.
Row 2 and all purl. Knit according to the pattern.
Row 3. Kp, slip 1 st, knit the next st and pull through the slipped st, *3 kp, yarn over, kp, yarn over, pull through, yarn over, 3 kp, 3 together kp, repeat from *.
Row 5. Knit, draw through, *2 knits, yarn over, knit, yarn over, draw through, yarn over, draw through, 2 knits, 3 together knits, repeat from *.
Row 7. Lp, draw through, *lp, yarn over, lp, yarn over, draw through, yarn over, draw through, yarn over, draw through, lp, 3 together lp, repeat from *.

Pattern 2:

Row 1. Purl stitch (SP), knit stitch, SP, 2 knit stitches, 2 together knit stitches, yarn over, knit stitch, yarn over, slip stitch, 2 knit stitches, SP, knit stitch, SP, continue from *.
Row 2 and all purl. Knit according to the pattern.
Row 3. Ip, lp, lp, *lp, 2 together lp, yarn over, 3 lp, yarn over, slip lp, lp, lp, lp, knit from *.
Row 5. Ip, lp, ip, *2 together lp, yarn over, 5 lp, yarn over, slip, ip, lp, ip, continue from *.
Row 7. Ip, knit, knit, *2 knit, yarn over, draw through, knit, 2 together knit, yarn over, 2 knit, knit, knit, knit from *.
Row 9. Ip, lp, ip, *yarn over, 3 together lp, yarn over, 3 lp, ip, lp, ip, continue from *.

Pattern 3:

1 row. Ip, lp, lp, *lp, 2 together lp, yarn over, 3 lp, yarn over, slip, lp, lp, lp, lp, continue from *.
Row 2 and all purl. Knit according to the pattern.
3 rows. Ip, lp, ip, *2 together lp, yarn over, 5 lp, yarn over, draw through, ip, lp, ip, knit from *.
Row 5. Ip, lp, ip, 3 lp, yarn over, 3 together lp, yarn over. 3 lp, ip, lp, ip, continue from *.

Manufacturing stages:

Cast on 123 sts using #4 knitting needles. Knit 24 rows using pattern 1.
Knit the next 20 rows with pattern 2.
Continue working 90 rows with pattern 3.
Row 91. Knit LP.
92 p. Perform decreases. Knit 5 ip, 2 together ip, *3 ip, 2 together ip, repeat from * 22 times, 6 ip.
There should be 100 sts left on the knitting needles. Transfer them to tool #3.5 and knit 4 rows with the front surface.
Next row: 4 knits, *2 together knits, yarn over, 4 knits, repeat from * to end of row.
Knit the next row with ip.
Knit 2 more rows with the stockinette stitch pattern.
In the next row, perform decreases: 3 knits, 2 together knits, *11 knits, 2 together knits, repeat from * 7 times, 4 knits.
There are 92 sts left on the needles. Knit 5 rows in garter stitch. Close all loops.
Assemble the product. Make a side seam, thread the tape through the holes.

Pencil

A strict model will complement a business image. The pattern slightly resembles an elastic band. The description of the model is designed for size 48.

It is necessary to prepare:

semi-woolen yarn - 7 (8) skeins;
circular knitting needles No. 4 and 4.5.

Patterns used:

Spiral elastic. Knit alternately 2 ip and 2 lp.

Step-by-step execution of work:

Cast on 140 sts using tool #4, close the row into a ring and knit in a circle with a 2 x 2 elastic band until the fabric reaches a length of 5 cm.
Row 1. Transfer the stitches to tool #4.5 and continue knitting: 1 ip, *2 knit stitches, 2 ip*, then from * to *, at the end 2 knit stitches, ip.
Row 2 (and all even rows). Knit according to the pattern.
Row 3. Shift the elastic pattern to the left by 1 st as follows: *2 ip, 2 lp*, continue from * to *.
Row 5. Shift the pattern to the left by 1 st: 1 knit stitch, *2 ip, 2 knit stitches.* Repeat from * to *, finish with 2 ip, 1 knit stitch.
Row 7. Shift the pattern to the left by 1 st: *2 knit stitches, 2 ip.* Continue from * to * until the end of the row.
Repeat 8 rows until the length of the product is 47 cm. Finish with an even row.
Transfer the stitches to knitting needles No. 4 and knit with a spiral rib pattern 8 cm with a shift to the left until the length of the product is 55 cm. Close the stitches.
Secure the ends of the threads. The bottom edge of the model is the cast-on edge.

Long

It is not difficult to knit a skirt with knitting needles for beginners that will emphasize the ankle line.

Materials:

wool yarn (400 m in 100 g) – 3 skeins;
knitting needles No. 4, 4.5 and 6.
elastic band 2.5 cm wide.

Belt pattern: stockinette stitch, worked on tool #4 and #6.

Step by step instructions:

On tool #4.5 cast on 110 sts and knit 2 rows. Continue working, knitting: edge, 99 sts in purl stitch (WS), 1 st in stockinette stitch (LS), 8 sts in WS, edge. Knit 9 rows in this manner.
Start knitting with shortened rows: at the end of the row, leave 20 sts without knitting, turn, make a double loop (leave the thread in front of the work, insert the knitting needle into the loop, as when knitting ip, remove it and pull the thread tightly, while the loop will lie on the tool doubly. When knitting, insert the knitting needle into both elements of the loop and knit ip or lp), knit the row to the end.
In each next row, leave 20 sts 2 times without knitting and 15 sts 1 time, turn, make a double loop and knit the row to the end.
Next, knit in extended rows: 18 sts more 1 time, 15 sts 1 time, and 20 sts 3 times. At the same time, after each turn, knit a double loop.
Knit 20 rows on all loops.
Continue with shortened and lengthened rows.
Repeat 10 times. Finally, knit 10 rows on all loops and leave them on the tool.
Sew open loops at the end and beginning of the fabric using the loop-to-loop method. The purl side is on the outside.
Edge, 8 sts ig and 1 st lg fold inward and hem.
Cast on 84 sts along the top edge of the skirt and knit 9 rows in a circle using the main pattern.
Next, transfer the loops to knitting needles No. 6 and knit 1 row. Then transfer the loops to knitting needles No. 4 and continue knitting 9 rows. Close the loops.
Fold the piece in half, stitch and insert the elastic.

Diagonally

Knitting a skirt with knitting needles for beginners in this way will not be difficult. This technique is called knitting on the bias. It allows you to get an original model. The product turns out most beautiful if you knit it from yarn of different shades in the same color scheme.

Materials:

knitting needles;
yarn.

Step by step production:

Start knitting from the corner. To do this, cast on 3 sts onto the needles.
We knit a row of ip.
In the next row, start making increases to begin to expand the fabric. After the edge, knit an additional LP from the loop of the previous row. Make a similar increase before the last st. To do this, you need to pick up the st. of the previous row and knit it LP.
In the purl rows do not make increases, and knit them simply ip. In all the front rows make increases.
In the process of work add a pattern - a small rib. Do this by alternately knitting the front rows: one knit, the next ip. In that front row, which we knit ip, also make increases, only ip.
Knit until the point where the width of the product is determined. Having reached this point, knit, making decreases on one side, and on the other, opposite, adding. Knit until the 2nd side reaches the height of the product.
Decreases are made only in the front rows. Knit 2 together knit or ip depending on what loops the row is knitted with. Decreases are made in the same places as increases, i.e. after the edge st and before the last one.
As soon as the 2nd side reaches the height of the product, knit, decreasing sts on both sides. As a result, we return to the last 3 sts. When 3 sts remain on the needles, close them.
This is how the skirt fabric is obtained, which is a rectangle. Similarly, knit the 2nd half of the product, but the diagonal direction should be in the opposite direction (from the other corner).
Having finished knitting 2 pieces, sew the product along the sides.
Knit the waistband of the skirt with a rib. Cast on loops along the top edge of the garment with circular knitting needles and knit a 1 x 1 rib in a circle. Determine the height yourself.

With a shuttlecock

This model is suitable for young girls. A playful frill will emphasize slender legs. The model is designed for size M. Hip circumference is 92 cm. The skirt is knitted from 2 parts. If desired, the length can be adjusted.

Materials:

circular knitting needles No. 3.5 and 4;
yarn (100 m in 50 g) – 8 skeins;
knitting needles - 2 pcs.

Patterns used:

Folds:

Row 1. 8 knit stitches, remove 1 st from left tool to right tool, leaving thread in front of fabric, 6 knit stitches, remove 1 st, thread behind fabric, *13 knit stitches, remove 1 st, thread in front of fabric, 6 knit stitches, remove 1 st, thread behind fabric, continue from *, knit last 7 sts.
Row 2. Knit, then knit ip to the end, knit the outer st.
Alternate rows 1 and 2.

Broken rubber band:

Row 1. Lp, *lp, ip, 4 lp, ip, knit from * to the end of the row.
Row 2. Knit, ip to end of row. Knit the outer st.
Alternate rows 1 and 2.

Step by step production:

Start working with pleats. Cast on 275 stitches on tool #4. Knit 32 rows with pleat pattern. Finish with a purl row.
Row 33. Begin forming the pleats. K, *slip the next 7 sts onto a sock needle, slip the next 7 sts onto the 2nd tool, turn the needle over with the wrong side to the wrong side of the fabric on the left tool and the left side to the same side of the fabric on the 1st sock needle (thus, from top to bottom in the left hand: left tool, 2nd and 1st sock needles). Pass the right tool through the first loops on all 3 needles of the left hand and knit together k. Repeat 7 times. The pleat is ready. Continue from * to the end of the row, knit the outermost st. 93 sts remain.
start knitting the main part of the product.
Row 34. K, ip to end of row, knit last st.
Knit 44 rows of broken ribbing pattern until desired length from the beginning of the folds.
In the row from the front side, make decreases. Row 1. K, *k, ip, knit 2 together, k 2, ip. Continue from *, finish k. 80 sts remain.
Row 2. Knit, ip to the end, knit the outermost knit.
Row 3. Lp, *lp, ip, 3 lp, ip. Repeat from * to end. Last lp.
Row 4. Lp, ip to the end, outermost Lp.
Knit rows 3 and 4 until piece measures 28 cm. Finish with a purl row.

Pleated

It is quite easy to knit a skirt with knitting needles for beginners of this model. The product is made in a circle, starting from the bottom edge. The number and size of folds can be different. A beautiful openwork pattern makes the model original and airy.

Materials:

knitting needles No. 4;
rubber;
yarn – 150 g.

Patterns used:

1 row. 6 knits, yarn over, 3 sts together, yarn over, 6 knits.
Row 2 and all knit stitches. Knit according to pattern.
Row 3. 4 knit stitches, 2 sts together with a tilt to the right, yarn over, 3 knit stitches, yarn over, 2 sts together with a tilt to the left, 4 knit stitches.
Row 5. 3 knit stitches, 2 sts together with a right tilt, yarn over, 5 knit stitches, yarn over, 2 sts together with a left tilt, 3 knit stitches.
Row 7. 2 knit stitches, 2 sts together with a right tilt, yarn over, 7 knit stitches, yarn over, 2 sts together with a left tilt, 2 knit stitches.
Row 9. Knit LP.

Step by step production:

Cast on 140 sts. Knit the elastic band in a circle: 7 rows of knit stitches, 1 row of ip, 7 rows of knit stitches, 1 row of ip. At the end, fold the band in half.
Knit 1 row for braids: 3 knit stitches, 4 ip. Knit a braid on 3 loops. *1 row circular 2 sts remove to an auxiliary tool and leave behind the fabric, knit stitch, loop from the knitting needle, then 4 ip. Continue until the row is complete. 2 edge stitches, then all loops according to the pattern *. Repeat the row from and to *.
Knit to the desired height and start knitting the bottom of the product.
To expand the fabric, knit as follows: yarn over, 3 knit stitches, yarn over, 4 ips, and so on until the row is complete.
Knit the next row according to the pattern. In this case, knit the yarn over with a crossed knit stitch so that the holes are small.
Next row: yarn over, 5 knit stitches, yarn over, 4 ip. The fabric increases. Add to the desired width of the bottom of the garment.
Knit this pattern until the fabric reaches the desired height.
Knit the last 4 rows of ip. Close the loops.
Hem the elastic band. Insert the elastic band into it. If desired, you can decorate it with beads.

Gode

A warm knitted product with fillet mesh inserts along the hem. The wedges are formed by partial knitting. The length of the model is 57 cm, and the waist circumference is 84 cm.

Materials:

circular knitting needles No. 4.5;
yarn – 8 skeins of 100 g;
hook;
elastic band for the waist.

Patterns used:

Basic:

Row 1. Slip 1 st onto a spare st, leave behind the fabric, knit and knit the remaining st.
Row 2. Knit according to pattern.
Row 3. Slip 1 st in front of the fabric, knit, then knit the remaining st.

Fillet net. Knit alternately 1 column with a yarn over, air loop. Repeat in a checkerboard pattern.

Step by step production:

Cast on 24 sts and knit with the main pattern for 25 cm, put all the sts aside. Knit 8 rectangles.
Collect all the details and knit 192 sts with the main pattern for 40 cm.
For fitting, in every 4th row, evenly decrease 2 sts 5 times. 182 sts will remain.
After 50 cm from the cast-on edge, knit with a 1 x 1 rib pattern for another 3 cm. Close all loops.
For the wedge, crochet a chain of 48 ch. Knit 1 row of sc, then continue working with a fillet mesh. Form 8 wedges and stitch them to the product.
Sew the skirt along the side seam. Fold the fabric for the belt, hem it and insert the elastic.

With smell

It is quite easy to knit a skirt with knitting needles for beginners, which will suit a woman of any age. The model is suitable for the office, going to a cafe with friends or a walk. The product can be knitted from any yarn.

Materials:

circular knitting needles No. 3 and 3.5;
yarn – 350 g.

Step by step manufacturing process:

Cast on 4 stitches using tool #3.5. Knit 1 row knitwise and 1 row ip.
1 row. Knit from 1 st. knit stitch and crossed knit stitch, then knit knit stitch, the last stitch is done similarly to 1 loop.
Row 2: Knit LP.
Row 3. Knit similarly to Row 1.
Row 4: knit 1 st. Repeat rows until the length of the product reaches 46 cm.
Continue working as follows: Row 1. Remove the loop, knit, then pull the removed loop through the knitted one, knit the remaining loops, knit the last 2 similarly to the first. Row 2: knit. Row 3: knit as row 1. Row 4: knit ip. Repeat until there are 4 sts left on the needles. Close them.
Assemble the garment. Continue knitting the seam allowance left for the wrap for another 12 cm.
For the belt, cast on 192 sts on tool #3 and knit around the entire circle with knit stitches. After 3 cm, knit 1 row of knit stitches to form a fold line, knit another 3 cm with knit stitches. Close the stitches.
Sew the belt inside. Step down 15 cm and sew.

From ribbon yarn

Ribbon yarn is similar to a ribbon. You can knit an original, festive product from such threads. When knitting, it is recommended to use the front surface.

Materials:

circular knitting needles;
ribbon yarn - 1 skein

Manufacturing process:

Cast on 100 stitches using circular knitting needles, inserting the needle into the upper stitches and closing them into a circle.
Knit 1 row knitwise.
When knitting 2 rows, turn the work over and knit ip. Knit 2 more rows like this.
Repeat until the product reaches the desired length.

Sun

The openwork pattern used to make this model will make it even more airy. This skirt will allow you to create a sophisticated, delicate image. The top of the product is 92 cm, the length is 68.5 cm, the circumference along the bottom edge is 508 cm.

You will need:

circular knitting needles No. 5.5, length from 40 to 150 cm;
yarn (97 m in 50 g) – 15 skeins;
markers – 64 pcs.

Instructions for knitting the pattern:

Row 1: K3, slip st, knit next 2, pass slipped st over knit, k3, yarn over, k, yarn over.
Row 2 and all even rows. Knit LP.
Row 3. K2, slip st, knit next 2, pass slipped st over knitted st, k3, yarn over, k, yarn over, k.
Row 5. K1, slip st, knit next 2, pass slipped st over knit, k3, yarn over, k1, yarn over, k2.
Row 7. Slip st, knit next 2 sts, pass slipped st over knitted st, k3, yarn over, k, yarn over, k3.
Row 9. Yarn over, knit, yarn over, knit 3, slip sts, knit next 2, pass slipped st over knitted st, knit 3.
Row 11. K, yarn over, k, yarn over, 3 k, slip sts, knit the next 2, pass the slipped st over the knitted st, 2 k.
Row 13. 2 knits, yarn over, knits, yarn over, 3 knits, slip sts, knit the next 2, pass the slipped st over the knitted st, knits.
Row 15. 3 knits, yarn over, knits, yarn over, 3 knits, slip sts, knit the next 2, pass the slipped st over the knitted st.

Instructions for making the model:

Cast on 160 sts, close into a circle without twisting.
Knit 2 rows with a 2 x 2 elastic pattern.
In the next stitch form holes for the cord at the waist. *2 knits, yarn over, 2 together knits*, continue from *.
Knit the next 2 rows with a rib pattern.
Mark the beginning of the next round with a marker, knit 1 round, marking the beginning of each pattern repeat with markers. A total of 16 markers.
Knit 23 rows in pattern: from 1 to 16, then from 1 to 7.
In the next round, make increases: *yarn over, lp. In total, you will get 320 sts.
Work in a circle with 16 additional markers inserted. Total 32 markers.
Knit 48 rows of pattern, starting with 1 round from 1 to 16 twice and 1 time from 1 to 15.
In the next round, perform increases *yarn over, LP*. In total, you get 640 sts.
Knit round, inserting 32 more markers. 64 markers total.
Knit 48 circles of the pattern, starting from row 9 1 time from 9 to 16, twice from 1 to 16, 1 time from 1 to 8.
In the last row, pull out an additional loop from the jumper of the previous one. Total 641 loops.
Close the loops in the following pattern. Close 2 sts, *slip the remaining st from the right needle to the left needle, cast on 2 sts, close 4 sts*, repeat until finished.
Steam the product. Tie a cord 120 cm long and thread it through the holes in the belt.

Things knitted with your own hands always turn out original and beautiful. A knitted skirt with knitting needles goes well with any clothes. A light openwork product can be worn with a T-shirt or top, and a warm model - with a blouse or sweater. The article presents descriptions of skirts for beginner needlewomen. It is enough to strictly follow the step-by-step instructions to create an exclusive wardrobe model.

Video on how to knit a skirt with knitting needles

The simplest knitted skirt: