Skirts with knitting needles. Patterns and description for women: warm, summer, openwork knitted

Knitted a skirt adds elegance and grace to a woman's image, and a product designed with your own hands acquires uniqueness and originality. There are many patterns and descriptions that will suit women of different ages and social status.

Classic pencil skirt

A knitted skirt (patterns and descriptions for women are simple and accessible) in a classic version will become an indispensable item in your wardrobe.

Execution technology:

• First, you need to decide on the length and size, taking into account the parameters of the figure.
• For thin women, it is advisable to choose delicate, thin patterns, and for curvy women, it is recommended to use dense weaving.
• Knitting should begin with creating an elastic band according to the scheme: alternating 2 purl loops with the same number of facial loops. It is recommended to take knitting needles No. 3.5.
• In the main ornament, the 1st row is knitted from 1 front and 1 back loop. The next line is formed according to the pattern. In the new tier, the ornament will shift. Above the front link, you need to make a back turn, and vice versa.

• The number of levels is knitted in accordance with the intended length.
• It is recommended to start weaving a pencil skirt from the bottom up.
• You need to cast on 276 sts and knit in a circle with elastic.
• Then divide the work into front and back panels and design the product according to the pattern.
• If the item is supposed to be knee-length, then the approximate number of rows will be about 70. This figure directly depends on the dimensions of the figure.
• For the upper part of the elastic band you need to knit 30 rows.
• To prevent the belt from stretching and to ensure it sits tightly on the waist, it is advisable to thread an elastic thread through it.

Lace skirt

To make an openwork item from merino threads, you need to follow these steps:

1. The main pattern is knit in a circle, and the number of loops must be a multiple of 16.
2. The diagram shows odd and even lines. The rapport should be repeated all the time.
3. Knit 1 row from the 1st to the 32nd circular row, then repeat 2 more rows, only you need to start from the 3rd tier and finish with the 32nd. As a result, you will get 92 levels.
4. Next, decrease according to the instructions:

Quantity, p.	Row No.
1	93
7	94
1	101
7	102
1	109
7	110

As a result, it turns out that the total number of ring rows is 116.

5. For a skirt, cast on 240 stitches (40/42-272 sts, 44/46-304 sts) crosswise for size 36/38, then close them in a circle and knit the fabric with the main pattern.
6. Having reached the 92nd tier, it is necessary to decrease the links according to the table.
7. After reducing, there should be 150 (170,190) sts left on the knitting needles.
8. The next step involves forming the belt with a face stitch. When its width reaches 6 cm, all the cells should be closed with a face stitch.
9. To assemble the skirt, you need to fold the waistband in half and sew it inside, leaving an open hole for pulling the elastic tape through.
10. Thread the tape through the opening, sew its edges together and sew up the hole.

Sun skirt

A knitted skirt (diagrams and descriptions for women suggest a detailed step-by-step process) can be made in a sun style.

To make it, you need to follow these instructions:

1. The creation of the product consists of knitting the fabric with a face jersey (satin stitch); during the process, the craft must be constantly turned.
2. It is recommended to make the edging line using garter stitch.
3. The skirt is shaped by decreasing stitches at equal intervals.
4. In the waist area, you need to make a hem and sew it so that an opening is formed for the elastic.
5. Thread the elastic tape through the drawstring and stitch it to form a circle.
6. Knitting density: knit 30 rows of 22 knit stitches each with knitting needles No. 4. You should get a 10x10 cm sample.
7. Cast on 640 sts on long circular knitting needles and knit in the round, marking the beginning of each row.
8. Continue working in garter stitch (1 row of front sts, next row – back sts). Work 12 rows.
9. Next, using the front stitch (all levels are knitted with front stitches), make 4 circles.

Then you need to adhere to the following pattern, while after each point knit 5 rows in a straight line:

Circle number with decrease	Number of loops with face	Number of knitted links	Loop of pro-pull	How many times does it need to be done?	Remaining loops	Note
1	2	36	1	16	608
2		34			576
3		32			544
4		30			512
5		28			480
6		26			448
7		24			416
8		22			384
9		20			352
10		18			320
After each circle below, 7 straight tiers should be knitted
11	2	16	1	16	288
12		14			256
13		12			224
14		10			192
15		8

After completing the instructions provided, you need to knit the back line to mark the level of the drawstring fold. Then knit 8 rows of face jersey. Finally, close all the links. Iron the finished product, hem the opening for the elastic, and secure it with a goat stitch.

Diagonal skirt

Step-by-step design of a diagonal striped skirt using plain and colored yarn:

• To make the product you will need multi-colored or sectionally dyed threads.
• The main knitting pattern uses a scar or alternation of purl and face tiers on one side of the fabric.
• The first thing you need to do is take measurements and mark them on the skirt template.
• During the needlework process, you should move diagonally from one corner to another. It is recommended to create 2 identical parts and then sew them together.

• First you need to cast on 3 loops and make 1 row of purl and knit loops.
• Next, you need to expand the panel by adding 1 link on each edge along the edge on the front side.
• When the width of the product is reached on one edge of the triangular piece, it is necessary to start decreasing according to the pattern identical to the addition. This means that before the edge sliver, knit 2 sts together. Continue increasing on the other edge of the triangular figure.
• When the length of the product along the wall of the increase is reached, it is necessary to make a decrease on both edges of the part.
• If different skeins are used in the process of creating an item, it is recommended to monitor the alternation of shades.
• Having reached 3 links on the knitting needle, they should be closed and start knitting the second piece. It is better to start it from the point that will be attached to the corner of the beginning of the 1st piece of the product.
• Knit the 2nd piece similarly to the 1st part of the skirt. It is recommended to control the width and symmetry of the color segments.
• Sew both panels together.
• Pull the loops out in a circle and make an elastic band. You can fold the edge of the item, sew it and insert an elastic band.

Warm skirt for winter

A knitted skirt (patterns and descriptions for women provide detailed instructions for making) is suitable as a warm item of clothing.

A warm model with openwork patterns:

• Create the product in circular tiers according to the diagram. Odd rows are marked on it. In even stripes, knit all the links following the image, make yarn overs with the front ones. Repeat 1-8 lines all the time.
• The item is designed in a circle from top to bottom.
• For sizes 38/40/42, cast on 150 (168/186 sts) on circular knitting needles, join the cast on into a ring and for the band, work 1 cm = 2 circular levels in garter stitch.
• Work as follows: * 5 sts of openwork stripe, 45 (51/57 sts) of front knitting, from * reproduce 2 more rows.
• The first patterned strip from the beginning of the tier forms the center of the back piece.
• To widen the product on the hips, after 5 cm (at a distance of about 16 rows from the strip) you should add a total of 6 links in the ring line. Here on each side of the openwork segment you need to knit 1 crossed front from the transverse thread, then knit the same satin stitch.
• Make similar increases 2 more rows after 6 rows and 3 rows after 10 circular lines. You should get 186 sts (204/222).

• To decrease the width at the bottom of the product after 32 cm (about 98 rows from the strip), you need to decrease the tier by 6 links in total. For this action, before each patterned strip, knit 2 sts together with a leftward slope, and then knit 2 sts together with the front one. Repeat such decreases another 4 rows after every 20 rows. The result will be 156 sts (174/192).
• At a distance of 58 cm from the bar (about 180 ring levels) it is necessary to create 1 cm for the edge, these are 2 circular tiers with motif 1, after which close all the links with the front method.
• Connect and sew the ends of the elastic band. Sew the tape from the inside, leaving the strip free.

Made of mohair

A mohair skirt will decorate a woman's wardrobe in spring or autumn.

Instructions for making the model:

• The main pattern should be knitted in ring rows (the number of links is a multiple of 26) according to the diagram. It shows the circular odd tiers. In the even lines, the loops are knitted according to the pattern, the yarn overs are made as front ones. The rapport is repeated all the time. Perform 1-40 levels once.

• Knit the openwork stripe motifs in a circle similar to pattern 1, but constantly repeat tiers 41-1 and 42.
• Cast on 180 stitches (208) on size 7 needles, join them into a circle, then knit in an openwork pattern in the round.
• At a distance of 20 cm from the beginning of the work (about 40 rows), switch to knitting needles No. 6 and make a pattern of lace stripes in a circle.
• Having made 32 cm of fabric (about 68 tiers) after changing the pattern, it is necessary to knit the belt with knitting needles No. 5. In the 1st ring line, 42 (48) sts should be reduced according to the following scheme: on each of the stripes of the motif between the lines of the openwork pattern, it is necessary to make 3x2 links together as front ones. As a result, you should get 140 (160 sts).
• Having knitted 4 cm (about 9 ring rows) from the beginning of creating the belt, you need to complete 1 purl tier, then knit the second part of the belt the same length as the first.
• At the end, close all the loops at the same time using the front method.
• Fold the top strip over and hem it inside, leaving a hole for threading the elastic band.
• Insert an elastic band of the required length, sew the edges and sew up the open opening.

Knitting density table:

Number of loops	Number of circles	Sample size	No. of needles
13.5	20	10x10	7
15	21.5		6
18	22.5		5

Summer mini skirt

A knitted skirt (patterns and descriptions for women will tell you how to easily create a beautiful item) is knitted not only in the winter version, but also in the summer.

Step-by-step production of the product in sizes 38 and 42:

• The shuttlecock pattern consists of 12 links: alternately perform 9 front sts, then 3 out sts.
• You need to cast on a number of loops that is a multiple of 12 and knit in circular rows according to the description.
• Repeat the rapport and tiers (from 1 to 8) all the time.
• With face knitting, 29 circular lines with 22 sts in each, the sample density will be 10x10 cm.
• It is recommended to knit the skirt in one piece in a circle, starting from the bottom.
• Using circular needles No. 3.5, cast on 540/576 sts and join the cast on into a ring.
• Perform a 45/48 rapport flounce pattern.
• After 4 cm (about 12 tiers from the start of the work) you should decrease the width of the thing. In each pattern, knit the initial 2 front sts together with a leftward tilt, knit the last 2 sts of the front stitch together. As a result, 90/96 sts will decrease and 450/480 sts will remain. All subsequent even ring lines should be knitted according to the pattern.

• Repeat the decreases twice more in every 2nd circular tier. There should be 270/288 sts left.
• In the next 2nd row of each motif, knit the remaining 3 links of the front fabric, making 1 loop with a double slope to the left. After this, 180/192 sts will remain.
• Having knitted 7.5 cm (about 22 rows from the beginning of the work), continue knitting according to the openwork pattern.
• After 34 cm (84 ring lines from the edge of the frill), work 7 cm with an elastic band (alternate 2 front sts and 2 back sts), then close all the cells according to the pattern.
• Sew half of the belt to the inside, leaving a small opening at the back to insert the elastic.
• Thread an elastic band through the drawstring, sew its ends together, then sew up the opening.
• Knit a thin cord with knitting needles, 120 cm long. Its width consists of 2 links.
• Carefully insert the lace into the top line of the openwork fabric; its edges should meet in the middle of the front panel.

Long

Master class on making a maxi skirt with a relief pattern:

1. The product is available in sizes 38, 42 and 46.
2. The item is knitted with a pearl pattern (1 front st, 1 purl st, then in each successive circular row the loops need to be shifted) and a braid motif of 48 sts, made according to the pattern. In even purl tiers, all the links should be knitted according to the pattern. Repeat the 1st-16th circular rows.

Knitting density:

Number of cells	Number of rows	Sample size	Needles No.	Pattern
17.5	27	10x10	4	pearl
24				braids

3. Cast on 304/320/336 sts on long circular needles, join them into a circle and for the strip knit 1 cm = 4 rows with a rib pattern (1 front st, 1 back st).
4. Continue working in this manner: *28/32/36 sts with pearl motif, 48 sts with “braids”, from * make 3 more rows.
5. To give shape, it is necessary to reduce in every 12th line from the strip 18x8 sts in the following way: in the pearl stripes, knit on the middle 4 sts 2x2 sts together, following the pattern.
6. When there are only 2 sts in the "pearl" stripes, you need to knit them together purlwise with the adjacent links of the "braid" pattern in the next circular tier of decreases. Then constantly knit the first 2 and last cells of the "braid" motif stripe together according to the description (this action is required only for sizes 36 and 48). As a result, 160/176/192 sts will remain.
7. When the length of the skirt reaches 83 cm from the placket, all cells should be closed.
8. Along the top edge of the product, cast on 128/140/152 sts with circular needles and knit a 5 cm high rib strip.
9. Fold the belt in half and sew it to the back of the craft, leaving a hole open for threading the elastic band.
10. Thread the elastic through the drawstring, sew the ends together, and sew up the open opening.

Flared

Knitting patterns for women's skirts include descriptions of both straight and flared styles.

Step-by-step implementation of the model:

1. The dimensions of the item are 34/38/42, the density of the sample (10x10) is 17.5 sts in 27 rows.
2. Cast on 560/616/672 crossed sts on circular needles No. 5 and knit in the round with a rib pattern (alternately 1 front st, 6 out sts). Repeat the pattern 80/88/96 rows.
3. To create the shape in the 20th row, each of the front cells should be knitted together with the previous st. After the reduction, 80/88/96 sts will be gone and 480/528/576 sts will remain. The same number of links should be removed in the 40th, 60th, 80th and 100th rows. 160/176/192 sts should remain on the knitting needles.
4. Between the front stripes the number of purl stitches will gradually decrease. As a result, the rapport will consist of 1 front and purl stitch.
5. In row 110 decrease 40/44/48 sts using the following method: *knit 3 sts together with a leftward tilt (remove 1 st, then knit 2 sts together and pull the removed link through the knitted knot), knit 5 sts according to the pattern, repeat from *.
6. At a height of 45 cm, finish all the cells with a needle.
7. To fix the skirt at the waist, you need to pull an elastic band through the holes of the last level using a needle, then fasten it.

In a fold

These types of skirts are knitted in several ways: imitation accordion, using the removed links method, or by forming real folds from the fabric.

Method of knitting a sample:

• First, make a calculation: 2 edge loops + the number of links, multiples of 8;
• if you cast on 34 loops, then the 1st row is cast on, and the 2nd is done using the front method;
• the next level is knitted as follows: edge, * 3 front sts, remove 1 cell without knitting (the working thread is located at the back of the panel), 3 front sts (remove 1 link without knitting, the thread is in front of the panel)* edge;
• the next tier is knitted with a rapport - *1 purl st, 7 knit sts*;
• then all odd rows are performed as the 3rd level, and even ones as the 4th;
• To create a product of your size, you need to calculate the required number of stitches according to the knitting density.

Step-by-step technology for making a pleated skirt:

1. Choose the size of the garment to suit your taste.
2. Cast on 140/160 sts using circular needles.
3. Place a knitting in the round marker.
4. 12 cm. Knit with a rib pattern (1 front, 1 back).
5. Make a circular tier with an increase: add a yarn over after each link. The result will be 280/320 sts.
6. Next, knit 15 cm with an elastic band (2 front, 2 back).
7. The next round involves adding yarn overs after every 2 sts.
8. According to this description, shape the product until the desired length is reached.

A stylish skirt is considered an integral part of women's clothing, and if the product is knitted, it favorably emphasizes femininity and elegance. Schemes and descriptions will help you cope with creating a wardrobe item with your own hands, giving you the opportunity to create any model you like.

Video about knitting skirts

Knitted skirts - diagrams and descriptions: