Slippers with knitting needles with description. New items for children, women, on 2-4 knitting needles. Master class video, schemes

Slippers, hand-knitted, these are beautiful and comfortable house shoes. They look like classic socks with a shortened or completely absent shaft.

Making a cozy pair takes very little time and provides a huge scope for imagination. Having mastered the basic principles of knitting socks with knitting needles, you can complement any home look with warm slippers.

This is a great way to use up leftover yarn that has been waiting for its time for a long time, because you don't need much material to create such shoes. Footwear knitted with knitting needles according to the proposed descriptions will be convenient for both children who often lose their slippers during active games, and adults who value comfort and coziness.

Necessary tools and materials

To knit slippers with knitting needles, you need to prepare the following tools:

• Classic straight or double pointed knitting needles of the appropriate size. The knitting needle size is determined by the thickness of the yarn. Usually, the recommended knitting needle size is indicated on the label of the skein of yarn. If the knitter does not have such information, the knitting needles should be chosen approximately 1 mm thicker than the thread. Knitting needles from 3.5 mm to 6 mm are usually suitable for knitting home shoes.
• A knitting needle with a blunt end for sewing knitted items.
• Colored markers for counting rows and dividing knitting fabric.
• A hook of the same size as the knitting needles or one size thinner for tying the free edge of the socks and for decoration.
• Measuring tape for determining the size and calculating the knitting density. When taking measurements, it is important to correctly position the tape relative to the foot.

The yarn for knitting slippers with knitting needles is best to choose semi-wool or acrylic, it is voluminous, soft and more wear-resistant than pure wool. If desired, you can add silk thread during the knitting process.

These socks will be more durable and will not stretch during wear.

For the warm season, you can knit slippers from yarn with the addition of bamboo fibers or viscose. For one pair of such home shoes of size 36-39, you will need about 70-100 g of yarn.

Knitting patterns with description of works

This selection consists of the most successful models, many of which are within the power of even a completely beginner knitter. It contains options from simple slippers that can be knitted in 15-20 minutes, to elegant footsies with intricate openwork. All that remains is to choose the model you like and start knitting.

Regular socks knitted on two needles

A simple classic model of knitted slippers looks neat and laconic. The absence of decor emphasizes the versatility of the model. Such slippers will suit both men and women. Slippers slippers are knitted on two 4 mm knitting needles, yarn thickness 50 g / 215 m., 10 cm 19 loops.

A step-by-step description of knitting will help you quickly get a pleasant result:

• Using straight knitting needles, cast on 42 stitches in a convenient manner (40 sts of the main fabric + 2 edge stitches).
• The edge loop at the beginning of the row must be removed without knitting, and at the end of the row it must always be knitted with a purl loop.
• Next, you need to knit a piece of garter stitch up to the base of your little finger, about 21 cm. Garter stitch involves knitting all the stitches in even and odd rows as front loops.

Next, you need to start forming the toe using decreases. Decreases should be done only in the front rows, the back rows should be knitted without changes using front loops.

The algorithm for performing reductions is clearly shown in the table:

1 row	Knit edge, *8 knit stitches, 2 knit together to the right, 2 knit together to the left*, 16 knit stitches, **, 8 knit stitches, edge stitch.
3rd row	*7 knits, 2 knits together right, 2 knits together left*, 14 knits, **, 7 knits, edge.
Row 5	*6 l. p., 2 persons. with a tilt to the right, 2 persons. to the left at the same time*, 12 persons., **, 6 persons., edge.
Row 7	*5 knit stitches, 2 knits together with a right slant, 2 knits to the left*, 10 knits, **, 5 knits, edge.
Row 9	*4 knits, 2 together knits to the right, 2 together knits to the left*, **, 8 knits, edge.
Row 11	*3 knits, 2 knits together to the right, 2 knits together to the left*, **, 8 knits, edge.

Next, you need to knit the back row not with the front loops, as usual, but with the back loops. After that, cut a thread 10-12 cm long and use a knitting needle to tighten the 18 loops remaining on the knitting needle. Fold the cast-on edge of the fabric in half with the back side inward and sew with the free end of the thread.

If desired, crochet the open edge of the sock and the seam with a contrasting color thread. Using the step-by-step description, you should knit the second sock of the pair.

Slippers with a braided pattern

Slippers with knitting needles with a volumetric braid pattern will give warmth and comfort in the cool season. Such slippers are knitted from semi-woolen yarn 100 g / 160 m with knitting needles 4 mm.

To work you need to use the following tools:

• Straight knitting needles for knitting the foot.
• Circular knitting needles of the same number.
• 3 mm hook for casting on stitches along the edge of the sole.
• An auxiliary knitting needle for making a braided pattern.
• A knitting needle with a blunt end.

Slippers sledki with knitting needles with a description and suggested patterns are a pleasure to knit. If you follow this step-by-step instruction, you get a pair of sizes 36-39.

Knitting should start from the sole (this part should be done the same for the left and right slippers):

• In the classic way, you need to cast on 8 stitches on straight knitting needles and knit 2 rows (all stitches are knitted).
• In rows 3, 5 and 7, you need to make increases: 1 knit, knit the next one for each wall (2 loops from one), then you need to knit until there are 2 loops on the needle, make an increase again, knit the last st. After completing row 7, there will be 14 loops on the needle.
• Rows 8-42 should be knitted with garter stitch.
• In row 43, you again need to make 2 increases according to the same principle as before; there will be 16 loops on the needles.
• Rows 44-74 should be knitted with front loops.
• In rows 75, 79 and 81, you need to decrease the loops to shape the sole: 1 knit, 2 together knit, then knit all the loops until there are 3 loops left in the row, 2 together knit, 1 knit. After all the decreases, there will be 10 loops left on the needle.
• Knitting of the sole is completed after completing row 82, close the loops in a convenient way.
• Using a hook, cast on 99 stitches along the edge of the sole, gradually transferring them to circular knitting needles. Then knit a set-up row of knit stitches.
• The side edges should be knitted with a 2 * 2 elastic band up to row 8, the last loop is purl.
• In row 9 you need to knit alternating 2 knits and 2 purl 12 times, 2 together knits, 2 purl, again alternating 2 knits, 2 purl 11 times, 2 knits, 1 purl. There should be a total of 98 loops on the needles.

1 row: you need to alternate the elastic band 2 by 2, starting with the front ones - 10 times, 18 front ones, 2 together front ones with a left tilt, then you need to turn the work. 2 row: 1 loop needs to be removed without knitting, 18 purl loops, 2 together purl, turn the knitting. Similarly, you should knit all the purl rows up to and including 44.

From the 3rd to the 43rd rows, you need to do the braid pattern according to the diagram. 1 slip, 1 knit, cross 4 loops to the right (4 times), 1 knit, 2 together knit with a tilt to the right. 5th row: 1 loop must be slipped, knit 18 knit, 2 together knit with a tilt to the left. 7th row: you need to slip 1 loop, 3 knit, cross 4 sts to the left 3 times, 3 knit, 2 together knit with a tilt to the left.

In the 9th row, remove the first loop, knit 18 front loops, 2 together front with a left tilt. Rows 11, 13 and 15 must be knitted similarly to rows 3, 5 and 7, respectively. Then repeat knitting rows 9-16 3 more times (a total of 40 rows must be knitted from the beginning of knitting the upper part).

Knitting of row 41 should be done identically to row 9, and then repeat rows 2, 3 and 4 once. There should be 54 loops on the knitting needles at this point. The next 10 rows (45-54) are knitted using all the loops. Row 45: 1 loop should be removed, knit 19 front loops, 2 back loops, 3 times you should alternate 2 front loops and 2 out., 2 front loops, 1 out.

In row 46 *8 times you need to perform the alternation 1 front, 1 back*, knit 22 back, repeat **. Row 47 should start with **, 5 front, cross 4 loops to the left 3 times, 5 front, and repeat ** again. Rows 48, 50 and 52 should be knitted identically to row 46. Row 49: you need to knit **, 22 front loops, **.

In row 51 you need to knit **, 3 front loops, cross 4 loops to the right 4 times, 3 front loops, **. Rows 53 and 54 should be knitted with front loops, then close all loops and make a seam at the back using a knitting needle.

Slippers with cones

Slippers with knitting needles, with a description of knitting of which you can read in this material, are decorated with an interesting volumetric pattern of braids and cones.

The basis for calculating the loops of such a pair of slippers should be taken from the description of the previous model, changing the main garter stitch pattern to a rice pattern, and replacing the toe pattern with the proposed decor according to the diagram.

Knitting socks with cones includes several stages:

• Knitting the heel fabric.
• Adding loops from the side edges of the heel.
• Knitting the main fabric of the sock.
• Decreasing stitches in the toe section.
• Knitting the upper decorative part according to the pattern.
• Knitting the second slipper.

For size 38-39 slippers you will need approximately 60 g of yarn 100 g/240 m.

Seamless Footprints

The slippers are made in one piece, without seams, sit neatly on the foot, look beautiful, and for knitting them you will only need a set of double-pointed knitting needles. All calculations in the description are given for yarn 100 g / 340 m and knitting needles number 3. The size of the finished slippers is 36-39.

Using the step-by-step description, it is easy to learn how to knit a basic model of house slippers, on the basis of which you can create various models for any occasion.

Instructions:

• Knitting of the socks should start from the heel. It is necessary to cast on 30 loops and knit the part in turning rows. All the front rows should be done as follows: 1 remove, without knitting, on the right knitting needle, 1 front, 1 remove, leaving the thread behind the work. It is necessary to repeat until the end of the row, the last loop in the row should be knitted purlwise.
• In the purl rows, you need to remove the first stitch, knit everything except the last stitch of the row, and knit the last stitch.
• To make the heel wall, you need to knit 30 rows of stocking stitch, and then start turning the heel.
• It is necessary to divide the loops into three parts using colored markers or simply conditionally. It is important that the number of loops in the side parts is even. In the proposed version, all three parts have 10 loops.
• You need to knit 17 loops with face loops, 2 together face with a left tilt, 1 face. Then you should turn the knitting, 10 loops should remain on the left knitting needle.
• Next row, slip 1, purl until there are 13 stitches on the left needle, purl 2 together, purl 1. Turn the work over again.
• The 1st loop must be removed, knit the front loops, not reaching 1 loop to the divider, 2 together front with a left tilt, 1 front. On the left needle - 8 loops.
• In the next purl row, remove the 1st loop, knit purlwise, not reaching the marker 1 st, 2 together purlwise 1 purlwise.
• Next, you need to continue knitting in the same way until all the loops from the side loops go into the central loops. You should knit the installation row with face loops.
• From the edge of the heel on one side, you need to pick up 15 loops, knit a row: remove 1 st, all other loops are purl. In the next row, you need to pick up 15 loops from the edge of the heel on the other side. After this, 48 ​​loops will remain on the knitting needles. After this, you should start knitting the foot in turning rows. You need to knit 22 rows and close in a circle.
• Knit the front rows as follows: *1 slip, make an increase from the yarn over, knit all the loops of the row, make an increase from the yarn over and finish the row with 1 front
• In the purl rows, 1 st must be removed, all loops in the row must be purled, the last loop must be knitted.**
• Repeat from * to ** 4 times.
• Next, you need to knit a row with the front stitches and distribute the loops onto 4 double-pointed needles, 15 loops each.
• After this, you need to knit the foot in a circle for 18-22 cm depending on the size, and then start decreasing with the 2nd knitting needle to form the toe. On knitting needles 2 and 4, knit 1 knit, 2 together knit with a left tilt, knit stitches to the end of the knitting needle. Knit knitting needles 1 and 3 until 3 stitches remain, make 2 knit with a right tilt, 1 knit.
• The next 2 rows should be knitted.
• Next, a row with similar decreases and 1 row of knits without decreases. This alternation must be repeated 3 more times.
• After this, you need to decrease the loops in each subsequent row until there are 5 loops left on each knitting needle.
• Using a simple transfer of loops, distribute them onto 2 knitting needles with 10 loops each.
• Join the loops with a knitting needle.
• Similarly, knit the second slipper of the pair and wear it with pleasure!

Openwork footprints

Feminine lace slippers are best knitted from cotton or linen thread. This model of summer home shoes is for those girls and women who are used to looking impeccable even at home in pajamas.

To knit beautiful slippers with an openwork pattern, you need to arm yourself with 2.5-3 mm double-pointed knitting needles and follow the step-by-step knitting instructions.

Instructions:

• Using 100 g/410 m thread, cast on 57 stitches and join into a circle.
• Next, you need to knit 1 row with knit stitches and 1 row with purl stitches, after which knit 12 rows according to diagram 1.
• You need to move the first 16 loops of the row and the last 16 loops onto 1 knitting needle.
• After this, 25 loops located in the center should be transferred to an additional knitting needle. These loops will later give rise to the upper part of the toe.
• From the remaining 32 free loops, you need to knit the heel. You need to knit 5 cm in stocking stitch, then mark the center of the heel with a colored marker.
• In the next four rows, decreases must be made, starting from the front side. In the 1st row, knit all loops as front loops, when there are 9 loops left on the needle, knit 2 with a rightward tilt, turn the work to the back side.
• Row 2 should be knitted purlwise, leaving 9 loops, then knit 2 together purlwise.
• Continue similar decreases until you have 16 stitches.
• Next, you need to cast on 12 loops on each side along the edges of the heel, return the 25 loops you set aside to work and continue knitting in a circle.
• For convenience, the central 25 loops should be marked on both sides with markers.
• The selected loops must be knitted with an openwork pattern, according to diagram 2, the remaining loops must be knitted with the front surface.
• In the 1st circular row, on the sides of the openwork pattern, you need to make decreases: knit together the outer loops of the foot and toe on each side. Such decreases need to be done only 8 times in every second row.
• Continue knitting until piece measures 18cm from marker indicating centre of heel.
• To knit the toe, distribute the stitches as follows: 24 stitches for the foot and 25 stitches for the top of the sock. Mark the stitches by moving the markers.
• Next, knit with the front surface, decreasing in every second row: knit one loop on each side of the marker together.
• When there are 9 loops left on the knitting needles, you need to cut the thread, pull the loops together with it and secure them on the inside of the sock.
• The second slipper should be knitted in the same way.

Slippers in two shades with a jacquard pattern

An interesting model of home shoes for warm feet from the designers of the Norwegian magazine Drops, perhaps the most famous knitting publication in the world. Even a needlewoman with little experience can knit slippers with knitting needles with the description offered in the magazine.

The following sequence of steps must be followed:

• Using the main color thread, cast on 40 sts on the knitting needles in a convenient way and make a row of purl sts. Knit the next 5 rows with face stitch.
• Two markers need to be placed in the center of the knitting and on the side that is more convenient

Conduct distance measurements, the so-called landmark:

• It is necessary to remove 1 edge st (knit all edge sts with face loops), then repeat the horizontal rapport of pattern A.1A 3 times, using a contrasting thread, 2 central face sts, then you need to knit 3 rapports A.1B and 1 face st.
• Knitting should be continued in the same way until the ornament of 21 rows is completely knitted, after which the contrasting thread can be cut and secured.
• At the same time as knitting the pattern, it is necessary to make increases when the height of the knitted fabric reaches 3 cm. Loops should be added in each row by creating yarn overs on both sides of the 2 center st. In total, it is necessary to make 34 sts (2 sts in each of the 17 rows). All new loops should be included in the pattern.
• At the beginning of the row, close 5 sts, knit to the end of the row, then at the beginning of the next row, close another 5 sts. At this point, 64 sts will remain in the work.
• Next, you need to knit 27 sts and transfer them to an additional knitting needle, 10 knits, the remaining 27, without knitting, transfer to the second additional knitting needle.
• On 10 working loops, it is necessary to knit the foot of the slipper with turning rows of garter stitch, connecting it with the deferred loops on additional needles in the process of knitting. After all the loops are included in the work, it is necessary to close the loops and make a seam.
• The second slipper should be knitted in the same way.

Footprints with ties and bows

Easy to make and very comfortable house slippers can be knitted with knitting needles according to the proposed description. The ties along the upper free edge of the slippers serve as a decorative decoration of the product and fix the correct fit on the foot.

To work, you need to prepare straight knitting needles 4-4.5 mm and 50-70 g of bulky semi-woolen yarn, you will also need a knitting or tapestry needle for stitching.

The following elements are used in knitting:

• Increase - 2 knit stitches from one. First, knit the knit stitch through the front loop, then knit the same stitch through the back loop, and then remove it from the left knitting needle.
• 2 together knits with a right tilt – 2 sts should be knitted together, inserting the knitting needle from left to right under the front loops of the loops.
• 2 together knits with a left tilt – slip 1 st as if knitted, 1 knit, pull the knitted loop through the slipped loop.

Step-by-step execution of work:

• Using any method, you need to cast on 94 stitches and knit 1 row of knit stitches.
• Rows 2-4 should be started and finished with increases, the remaining loops should be knitted. By the end of row 4, there should be 100 sts on the needles.
• Next, you need to knit 12 rows without adding in a simple garter stitch pattern.
• All subsequent front rows should be knitted according to the pattern: 2 together front with a left tilt, 10 front, 2 together front with a right tilt, front sts to the end of the row.
• All purl rows should then be knitted as follows: 2 together knits to the left, 10 purl, 2 together knits to the right, knits to the end. Continue working until there are 52 loops on the needles.
• Next you need to knit 1 row of front sts, then 21 front sts, 10 purl sts, 21 front sts.
• In the next row, you need to knit holes into which you can later insert ties. 1 front, * yarn over, 2 together front with tilt to the right, repeat from * to the end of the row, 1 front.
• After this, you should knit 3 more rows of front loops and close the work. Using a knitting needle, make seams.
• Insert a suitable braid or crocheted cord into the holes along the edge of the sock, fix the volume and tie it into a bow. If desired, the edges of the braid can be decorated with contrasting pompoms.

Half-sock slippers

Warm slippers, knitted with knitting needles in the form of short socks, thanks to the enlarged upper part completely cover the foot and sit tightly on the leg.

Half socks should be knitted using a set of double-pointed knitting needles in a circle, knitting from top to bottom, as in the classic version of socks.

Multicolored bright footprints "Watermelons"

Children will be happy to wear such bright, cheerful slippers. Having mastered the technique of knitting these multi-colored slippers, you can knit any "fruits" you want. And such multi-colored house slippers are a good idea for a gift.

Slippers with knitting needles with a description of knitting will require a little time to complete. It is necessary to knit such slippers with sock knitting needles, having previously prepared the yarn of the necessary shades. The work consists of knitting two parts - the inner red and the outer, which are then sewn together.

Instructions:

• On 2 knitting needles with green thread, cast on 30 loops and knit 35 rows with the front surface.
• Next, cast on 10 more stitches and distribute all stitches onto 4 knitting needles, 10 stitches on each. Continue knitting in a circle. You need to knit 25 circular rows.
• After this, you need to start decreasing the loops to form the toe. In even round rows, you should knit 2 sts together at the beginning of each needle until there are 2 sts left on the needle - a total of 8 sts.
• The loops need to be pulled together, the thread needs to be pulled inside the sock and secured.
• Using red thread, you need to knit exactly the same piece, insert it into the green upper part of the slipper and sew it together, and also make the heel seam.
• The free edge can be crocheted with yellow thread. The inside of the sole can be decorated with black yarn, imitating watermelon seeds.

Tips for Beginners

For those who are just beginning to master knitting home shoes, and knitting in general, there are some recommendations. All of them will help to get a good result even with little experience.

Adviсe:

• Choice of yarn. The comfort and durability of the product directly depend on the chosen threads. The yarn for knitting socks should be well twisted, not loose. In addition to strength, such a thread holds the pattern well.
• Beginner knitters should choose slipper models that are made with two knitting needles. It is easy to choose their size if you compare the thickness of the knitting needle and the selected thread. They should be approximately the same.
• In order for the footies to be comfortable and fit tightly, it is necessary to accurately and correctly measure the length of the foot and calculate the loops. Too large footies will stretch during wearing and will slide off the heel.
• To knit openwork socks, you need to choose larger knitting needles, from 4.5 to 6. Dense socks can be knitted with 3-4.5 mm knitting needles.

Knitted house slippers, footsies or cozy half-socks are useful and stylish accessories for the whole family. Any of the proposed models can be easily knitted thanks to the patterns with detailed descriptions.

Video about making slippers with knitting needles

Knitted slippers-footprints, instructions: