For several seasons now the Takori hat is the most popular model among headwear. A warm and stylish accessory allows you to add individuality to your image and make it unique.
Takori is the name of the hat, which comes from the surname of the model's creator. Svetlana Takori is a designer who developed not only a mohair headdress with a wide lapel, knitted with knitting needles, but also an entire clothing brand.
What you will need for the job
To make a Takori hat you will need very little.
An approximate set of materials and tools includes:
- yarn: mohair, mink fluff, angora or any other fluffy threads;
- stocking or circular threads;
- measuring tape;
- needle or hook;
- scissors.
When knitting with another pattern, for example, braids, you will need pins to which you can remove additional loops. Beginner needlewomen are recommended to use markers when doing work in a circle.
Mohair and angora are quite thin threads, so the product from them is knitted in 2 threads, since this yarn is quite thin. When calculating the required amount of yarn, it is worth considering that knitting with English elastic requires 1.5 times more threads than when creating products with other patterns with knitting needles.
Which yarn is better to choose?
The appearance of the finished product depends on the choice of yarn, so you need to approach this process very responsibly. The hat model involves creating from fluffy threads.
Taking into account the features of the headdress, it is recommended to use the following types of yarn for knitting:
- angora;
- mohair
- mink down;
- alpaca;
- rabbit fluff;
- wool.
It is worth considering that the product is made with large knitting. Therefore, knitting with thin thread is carried out in several folds. In principle, you can use absolutely any yarn, it all depends on personal preferences.
Taking measurements and calculations
Despite the fact that this model has a good length reserve, it is important to make the calculations correctly so that the product does not turn out too long or short. The hat has 2 lapels, so each in cm must be multiplied by 2. Add the depth and allowances (approximately 4 cm) to the result obtained.
For correct calculation the following parameters are required:
- Full girth. Measure around the widest part of your head.
- Product depth. The measurement corresponds to half the distance from one ear to the other.
In a situation where it is not possible to take measurements, you can use the age size chart. Since the knitting pattern uses a pattern that stretches well, you need to subtract 2 cm from the resulting figure. This will ensure a good fit of the product.
Easy way to tie Takori
Knitted hat Takori from mohair in a simplified version. Knitting is done in a circle, which will allow you to make a product without seams. Mohair or wool yarn, 500 m per 100 g, is suitable for making a hat. For a model for an adult, you will need 1 skein.
To create the model you will need:
- yarn: mohair, wool or other fluffy;
- circular knitting needles No. 4;
- needle.
Step by step instructions:
- Cast on 90 stitches using 2 strands of yarn and knitting needles.
- Connect and knit 1x1 elastic in a circle: 1 front (k), 1 back (p).
- Knit 30 cm.
- The formation of the top of the future hat begins. To do this, perform decreases.
- Depending on what 1 loop: front or back, make decreases. For example, if 1 knit, then knit together 2 knits, if ip - knit ip. Knit the next loop according to the pattern. Then knit together the next 2 loops. Knit the next loop according to the pattern.
- This will create a transition to a 2x2 elastic band.
- Knit the next 2 rows without decreasing according to the pattern.
- Knit the row again, making decreases. But this time knit 3 loops together. Knit according to the same principle as in the 1st row of decreases, if 1 front, then knit 3 loops together lp, that is, whichever 1 loop, so do the decrease. Knit the next loop according to the pattern. Make decreases again. Continue until the end of the row.
- So, back to the 1x1 elastic. Perform this pattern 2 rows without decreases.
- Knit the last row using decreases only, knitting 2 stitches together.
- Gather the remaining loops onto the thread using a needle. Pull tightly, make a knot and hide the thread inside the product. Trim the ends.
How to knit a hat with English rib in a circle?
English elastic is a voluminous pattern with which needlewomen create textured and lush knitted items. This pattern is ideal for making winter hats from warm fluffy yarn.
To make the model you will need:
- mohair or any other fluffy yarn;
- knitting needles No. 4;
- needle;
- hook;
- scissors.
Step by step production:
- Take measurements to determine the head circumference. This parameter for an adult is on average 55-60 cm. It is necessary to cast on approximately 78 loops on the knitting needles.
- Complete 1 row as follows: yarn over away from you, slip stitch with yarn in front of work, 1 knit stitch behind front loop.
- Perform the 2nd row and subsequent even rows: make a yarn over, unknitted loop of the previous row and knit together knits, throw the thread away from you, remove the knit stitch, while making sure that the thread is behind the work.
- Knit the 3rd row and subsequent odd rows: place the thread on the knitting needle away from you, remove the purl stitch, making sure that the thread is in front of the work, yarn over the previous row and knit the unknitted loop together through the front wall.
- Continue knitting, alternately rows 2 and 3, until the product reaches the desired length.
- The crown is formed in the following way: evenly decrease the loops in the straight and reverse rows, so the fabric will acquire a rounded shape. To do this, knit the entire row with 3 loops together knitwise.
- In subsequent rows, the decreases are performed so as not to leave edge loops.
- When there are very few loops left on the knitting needles, cut the thread, leaving a length of about 10 cm. Using a needle, gather the open loops onto the thread, pull together and tie tightly.
- Turn the finished product inside out, steam it and connect the side edges with a hook or needle. Make sure that the seam is not too strong so that the product retains its elasticity.
Polish rubber band
Knitted hat Takori from mohair with 1 flap. The model, connected according to this master class, turns out very delicate and cute. If you want to knit a hat without a flap, knit the product to a height of 27-28 cm. For a model with 2 flaps, this parameter should be 32 cm.
Materials and tools required:
- circular knitting needles No. 3.5;
- mohair or wool yarn at the rate of 190 m per 100 g;
- scissors;
- needle.
Step by step production:
- First of all, you need to calculate the number of loops. To do this, you need to knit a sample to determine the knitting density, that is, how many loops are contained in one cm. For example, the density is 2 loops.
- For the stretch of the fabric for a size 56 product, subtract 20%. Thus, we get 56 – 20% = 45. Multiply this value by the knitting density indicator. In this particular case, we get 90.
- The resulting number must be reduced to a figure that can be divided by 4. This gives 88 + 1 slip stitch.
- Cast on stitches in the most convenient way, connect them into a ring and knit to the desired length using the following pattern: Row 1 – 3 knit stitches, 1 ip; Row 2 – 1 ip, 1 knit stitch, 2 ip.
- Start to form the crown. To do this, knit a row as follows: 1 knit, 3 loops together ip.
- Knit the next row, alternating 1 knit stitch with 1 ip.
- Then do the row as follows: knit all loops 2 together behind the front walls.
- Gather the remaining loops onto the thread using a needle and tighten well. Hide the thread on the wrong side and trim the ends.
French elastic
When knitting a hat with a French elastic, calculate the number of loops so that the pattern does not stretch during wear and retains its original appearance for a long time. This description is designed for a model that will fit a head with a volume of 60 cm. The product is 21 cm high, excluding the pompom. If desired, this parameter can be increased to the desired one.
Necessary materials and tools:
- wool or mohair yarn;
- circular knitting needles (select the number according to the thickness of the thread);
- needle;
- scissors.
Step-by-step production of the product:
- Cast on 119 stitches using the classic method.
- Knit 62 rows as follows: 1 knit, *2 ip, 2 knit, * ip.
- When 62 rows have been knitted, start forming the crown.
- Knit 2 sts together, slip st.
- Knit like this until there are a minimum number of loops left. Gather them with a needle on a thread and tighten.
- Sew the side parts together or crochet them together. Sew a fur pompom on top.
How to knit a stitched takori?
The Takori hat knitted with mohair is becoming increasingly popular. This model looks good on people, regardless of age and gender. The production is so simple that even a beginner needlewoman can cope with knitting. The model can be made in two ways: in a circle or as a canvas, with subsequent stitching. It is recommended to use fluffy bright yarn to make this product.
Necessary tools and materials:
- circular knitting needles (select the number according to the thickness of the thread);
- mohair and wool yarn;
- scissors;
- needle.
Step by step production:
- Take the necessary measurements. If this is not possible, you can use the size chart depending on your age.
- Cast on the required number of stitches on the knitting needles in the classic way. If the thread is thin, do this in 2 additions.
- Continue working with a 2 x 2 rib pattern, alternating 2 knit stitches with 2 ip stitches. Knit until the piece measures 35 cm in length.
- Start forming the crown. To do this, visually divide the fabric into 4 equal parts and perform decreases.
- To do this, knit 2 loops together at the beginning and end of each.
- When there are 8 loops left on the knitting needles, gather them with a needle and thread.
- Connect the edges with a crochet hook or sew. Pull the open loops together with a thread. Decorate the top of the product with a fur pompom in the same color.
How to crochet?
The Takori hat can be knitted not only with knitting needles, but also with a crochet hook. To knit such a model, use a pattern of single crochet columns or an elastic band of relief columns. The model knitted in this way does not stretch and retains its original appearance for a long time.
To work you will need:
- yarn: alpaca, angora, mohair;
- hook corresponding to the thickness of the thread.
Step by step instructions:
- This model is designed for a head circumference of 50 cm and a product depth of 42. If you want to form 2 lapels, you need to increase the length of the product by 16 cm. The density of the pattern is 20 * 20.
- Crochet a chain of 80 air loops (ch). Knit 1 row with single crochet stitches.
- Perform 2 lifting ch. Perform the next row with single crochets.
- Work subsequent rows as follows: ch 2 into the outermost column of the previous row, then knit double crochets behind the back wall.
- When the main fabric of the hat is knitted, start forming the crown. Do this by knitting incomplete rows.
- In the 1st row of the beginning of the formation of the crown, knit 64 columns.
- In the 2nd row, reduce the number of loops to 62.
- In this way, perform several shortened rows to decrease the stitches evenly.
- In the last row, connect both edges of the product.
Takori hat with beard
Knitted Takori hat made of mohair with a beard. This model will protect not only the head from the cold, but also part of the face. The product is popular with men, and is also great for children. It is important to choose the right threads for this model. It is advisable to use threads with a natural composition.
Materials required:
- yarn;
- circular knitting needles;
- scissors.
Instructions for making:
- Take all necessary measurements. To calculate the number of loops needed to knit this model, you need to knit a sample and calculate the number of loops in 1 cm. Multiply the resulting parameter by the size of the head circumference.
- Cast on the required number of stitches in the classic way and continue working with the selected pattern to make the hat to the required length.
- Start forming the crown. For this purpose, in every 3 rows, perform uniform decreases. Reduce by 4 loops.
- When the main fabric is ready, start knitting the beard.
- Cast on the required number of stitches from the bottom of the garment. Knit 3 rows with English elastic.
- At this stage, start knitting the gap for the mouth. The intended location must be marked in advance. In this area, close the loops, knit the row to the end. In the place where the loops were closed, in the next row, pick up the loops again and knit, similarly closing the loops.
Takori hat with braids
The product can be knitted not only with an elastic band. The use of braids makes the model original and stylish.
Necessary materials and tools:
- wool yarn;
- hosiery knitting needles (determine the number based on the thickness of the yarn);
- elastic thread.
Manufacturing instructions:
- Knitting begins with making a flap. Cast on 104 stitches on the knitting needles in the classic way, knit 1 row of LP, distributing them evenly over 4 knitting needles.
- Work with a 2 x 2 elastic band (alternating 2 knit stitches and 2 ip stitches) in a circle.
- Continue knitting, making 1 row of ip. Then another 25 rows with a 2 x 2 elastic band, but change the arrangement of the loops: if initially you alternated 2 front with 2 back, now alternate 2 back with 2 front.
- Remove the thread, place the starting edge on an additional knitting needle: you will have 2 open edges - the starting and ending ones.
- Thread a hat elastic band through each loop of the 24th row from the start of knitting using a needle. Secure it. This will ensure a tight fit of the hat.
- Fold the bottom edge of the flap with the elastic along the row of ip and combine both open edges. It is worth noting that the row of purl loops should be located on the front side.
- Change the knitting needles to a larger number. Knit a row with a 2 x 2 elastic band, each time catching 2 loops: from the upper and lower open edges. The double turn-up is ready.
- Continue knitting with a braid pattern. Repeat: 2 ip, 6 knit stitches 13 times. Knit according to the pattern for 6 rows, in the 7th row make a braid: 2 ip, 3 knit stitches remove to a pin or an additional knitting needle, leave before work.
- Continue knitting 3 knit stitches, 3 knit stitches from an additional needle (1 braid link is ready).
- Repeat 7 rows of the pattern and another 5 rows of 3 links.
- In the 6th row, begin decreasing to form the crown. Knit 2 purl together. There will be 91 loops left in the work.
- Perform row 7 3 braid links. In row 4 4 braid links knit a row as follows: 1 purl, 2 together knit with a left tilt, 2 front, 2 together knit with a right tilt - repeat 13 times. You will get 65 loops.
- Perform row 5 4 braid links: 1 ip, 2 together LP with a left tilt, 2 together LP with a right tilt - repeat 13 times. You will get 39 loops.
- Perform row 6 4 braid links: 1 ip, 2 together lp - repeat 13 times. 26 loops remain.
- The next 2 rows knit all loops 2 together. You will end up with 7 loops.
- Tear off the thread and use a needle to thread the thread through the remaining loops and tighten it. Tuck in the ends. The hat is ready. The top can be decorated with a fur pompom.
You can knit a Takori hat in different ways: in a circle or with a cloth, with subsequent stitching, with knitting needles or a crochet hook. The main thing is to use fluffy yarn when making the model. This is the main feature of the product. The hat can be knitted from mohair, mink fluff, angora, rabbit fluff and other threads. The main advantage of the model is its stylish appearance and practicality.
The hat is very warm, and at the same time it is extremely comfortable to wear. The finished product must be washed and dried on a horizontal surface. It is worth noting that the model is made of yarn with a high content of natural fibers, so such a product should only be washed by hand.
Video about knitting a takori hat
Knitted takori hat: