The steam locomotive is the first device that appeared in 1801, which moved on rails. Special steam engines were used as the driving force. This device can be found in cartoons and TV series for children. The most popular are "Thomas and his friends", "Fantasy patrol". You can draw a steam locomotive by following the step-by-step process of performing the work.
Drawing with a simple pencil
A steam locomotive (a drawing for children in pencil) is a rather interesting device that is often found in animated series.
The animated style (in which cartoons are made) allows the child to better understand complex aspects, and also forms a positive opinion about the characters that various machines and devices represent.
Pencils, paper and supplies
To draw a steam locomotive, you will need:
- compass;
- ruler;
- simple pencil;
- sheet of paper;
- eraser;
- sharpener.
A ruler and compass are required to create clearer and more even geometric figures that are used in the process of doing the work.
Step by step process of execution
Older children can draw a steam locomotive with a pencil using this technique.
Step-by-step process of completing the work:
- First, you need to draw a wide rectangle, which will be the basis of the locomotive. On one side, you need to attach a square to the rectangle as shown in the picture.
- On the other hand, at the bottom of the rectangle, you need to create a right triangle at the bottom of the drawn rectangle.
- On the triangle line you need to draw a small wheel.
- On the bottom edge of the wide rectangle, you need to place 4 circles as shown in the picture. Their diameter should be the same.
- The previously prepared wide rectangle must be divided into 2 parts by a horizontal line so that the upper and lower parts are equal.
- In this case, you do not need to touch the area of the previously drawn square with a pencil.
- From the outermost corner of the triangle, it is necessary to draw a rectangle, the lower border of which will coincide with the border of the main part of the locomotive.
- You also need to draw a figure that resembles a rectangular trapezoid, which will “come out” of the previously drawn figure.
- At the top of the main rectangle, you need to draw a small square from which an inverted isosceles trapezoid will emerge.
- Using an eraser, you need to remove unnecessary details, and also erase the pencil lines between the large wheels of the locomotive.
- Once the basic shape is ready, you can begin to detail the drawing.
- In the square located on the right side of the drawing, you need to draw 2 small rectangular windows.
- You also need to draw the elements that will connect the locomotive wheels together, and then create additional lines (as shown in the picture).
- On the right side of the main figure you need to draw a ladder.
- It is also necessary to draw the wheels in more detail.
- It is necessary to depict the roof of the steam locomotive, and also to add a steam pipe. It is important to pay attention to the changes in the proposed drawings.
The finished drawing can be colored. The main elements can be outlined with a gel pen, felt-tip pen, or duplicated with a simple pencil.
Step by step process of execution
Even the smallest children can draw a steam locomotive.
To do this, you need to use a different scheme for performing the work:
- First, you need to draw a wide rectangle. On the right side, you need to extend the right line upwards. The resulting figure will be the basis for the future locomotive.
- At the bottom, parallel to the bottom edge of the rectangle, you need to draw a line. The line should be slightly longer than the locomotive itself, and the distance between the figures should be small (as shown in the picture). This line is the railroad.
- From the previously prepared extended line, it is necessary to form a narrow rectangle. The figure must be drawn as shown in the picture.
- On the left side of the image, starting from the top border of the main rectangle, you need to draw a small rectangle.
- The base of the locomotive is ready, now you can start drawing the details.
- From the small rectangle you need to draw an inverted trapezoid, the sides of which will be equal.
- In the upper rectangle, you need to draw a flat, wide rectangle, which will be the roof of the locomotive.
- You also need to complete the main rectangle: draw a rectangular trapezoid on the right side. Also, you need to draw another line at the bottom (as shown in the picture).
- At the bottom, you need to draw 3 circles of different diameters. The diameter of the largest one should be similar in size to the rectangle, and the others - 2 times smaller.
- Within each circle, another circle must be drawn.
- At the top of the rectangle you need to draw a small square - a window for the driver's cabin.
- On the left, you need to draw an isosceles triangle, and also draw another right triangle - a protective mechanism for the locomotive.
- The previously drawn rectangular trapezoid needs to be slightly rounded.
- On the “nose” of the locomotive you need to draw a small rectangle.
- From the resulting drawing, it is necessary to remove excess lines (as shown in the picture), and also add small details.
The resulting drawing can be colored as desired or left as is.
With colored pencils
A steam locomotive (a drawing for children with colored pencils) can be drawn using ovals of different diameters. This method is suitable for older children. In this case, you need to hold the picture in front of you to draw from "life".
Pencils, paper and supplies
To complete this work you will need:
- set of pencils;
- simple pencil;
- white sheet of paper;
- eraser;
- sharpener.
If desired, you can use a ruler and other materials at hand to obtain straight lines.
Step by step process of execution
Step-by-step process of completing the work:
| Stage | Description of the stage | Image |
| 1 | On a clean sheet of paper, you need to draw an oval. From the top and bottom points, you need to draw parallel lines of the same length. The length of the lines should be equal to the desired size of the future locomotive. The end lines should be connected using an arched line. |  |
| 2 | On the side of the resulting arc, it is necessary to draw a rectangle, which will coincide in height with the drawn oval. In this case, the figure should touch the arc-shaped line at one point.
At the top, you need to draw a low trapezoid, as shown in the picture. |  |
| 3 | Now you need to work on the upper part of the drawing. You need to draw 3 small rectangles (as shown in the picture).
On the left rectangle you need to draw a small hexagon, which will represent a tube for the steam outlet. |  |
| 4 | Then you need to switch to the bottom side of the drawing and draw 2 right triangles - as shown in the example. |  |
| 5 | Also, at the bottom, you need to draw 2 small rectangles, one of which will be long and thin, and the other will look more like a square. |  |
| 6 | Draw 6 circles of different diameters by hand at the bottom. It is important to form 3 pairs of circles with the same diameter. |  |
| 7 | The resulting wheels must be connected with a broken line. |  |
| 8 | Based on the example image, you need to connect all the elements of the drawing together. |  |
| 9 | Then you can start detailing the resulting locomotive. It is necessary to draw the components of the protective mechanisms and the main device, and also add 2 parallel lines under the locomotive - the railway. |  |
| 10 | The extra elements of the drawing must be removed with an eraser. If desired, you can duplicate all the main lines of the resulting image. |  |
When the main drawing is ready, you can start coloring. This drawing is used as an example image.
Step-by-step process of completing the work:
- The driver's cabin and the main part of the locomotive must be painted with a green pencil.
- Using a black pencil, lightly pressing on the lead, you need to fill in the remaining elements of the drawing, not including the wheels.
- Using a black pencil, you need to add shadows. With a lead, you need to draw over the green pencil - as shown in the picture in the place of darker areas.
- The driver's cabin window needs to be filled with a blue pencil. To make the effect more natural, it is best to use one of the hatching techniques.
- You need to paint the locomotive wheels with a red pencil, and use a yellow shade to paint the element that connects them.
To get a brighter image, you can use felt-tip pens or duplicate all the pencil colors used.
Gouache
The locomotive (a drawing for children can be drawn in 7 stages) is best painted with gouache, as it conveys colors more vividly and is suitable for use by children.
Pencils, paper and supplies
To complete the work you will need:
- paints;
- brushes and brush accessories;
- thick paper;
- pencil;
- eraser.
If desired, you can use a palette or mix colors on a clean sheet of paper.
Step by step process of execution
Step-by-step process of completing the work:
- First, you need to draw the cabin - draw a square on the left side of the sheet. Then you need to draw a rectangle with a panel in the form of an arched line. At the bottom of the drawing, you need to finish drawing a rectangular figure - as shown in the example image.
- In the upper part of the drawing, on the front section, you need to add 2 semi-ovals. On the previously drawn square, you need to draw a curved rectangle that will act as a roof for the cabin.
- A rectangle needs to be added to the front of the engine to form the smoke stack, as shown in the picture.
- You also need to add rectangular details and a curved shape at the bottom of the image.
- Just above the wedge, you need to add a slightly inclined rectangle.
- You need to add 2 rectangles to the driver's cabin - windows.
- In the front part of the machine, you need to draw an arched shape - as shown in the picture, and at the back of the locomotive you need to create a device that connects the driver's cabin and the cars.
- It is necessary to add 4 wheels to the bottom of the locomotive, 1 of them should be located in the front part of the machine and be the smallest, and the other 3 should be located close to each other (closer to the back of the locomotive).
- You also need to add 3 arched rods, draw a diamond shape on the cabin and add small rectangular details - as shown in the picture.
- Using the reference image, you need to add small details to the prepared drawing, which will complement the resulting locomotive.
- In various parts of the locomotive, it is necessary to draw piston sections in the form of long thin rectangles.
Using a felt-tip pen, you need to fill in the main features of the locomotive, and remove the remaining elements with an eraser. When the template is ready, you can start coloring the finished drawing.
Step-by-step process of completing the work:
- First, you need to fill the steam engine cabin with gray. To do this, mix black and white paint. If desired, you can add a little blue.
- It is important to apply the shade in a thin layer so that the paint does not crumble during the drying process.
- The wedge and some elements of the locomotive must be painted yellow, as shown in the picture.
- When the grey paint has dried slightly, you need to take a small amount of white paint on the brush and in characteristic places give the resulting locomotive a metallic sheen.
- It is important to stretch the paint to get a slight gradient.
- Mixing the rest of the grey paint with a bit of green, you need to paint the curved rods on the boiler, as well as the window grilles and the piston mechanisms.
- It is best to work with the resulting shade using a thin brush for a more accurate result.
- On the palette, you need to mix a large amount of white and a little blue paint. The resulting shade should be used to paint the wheels, as well as the fastening mechanism.
It is important to remember that when working with gouache, you must first bring the paint to a creamy consistency.
Watercolor drawing
The locomotive (a drawing for children can be bright) can be painted with watercolors. Watercolors are easier to use and allow you to create a rich drawing.
Pencils, paper and supplies
Tools that will be required during the work:
- simple pencil;
- eraser;
- sharpener;
- white sheet of paper;
- brushes;
- brush accessories.
You will also need water and a ruler during the process.
Step by step process of execution
First you need to work out the template:
- On paper, you need to draw a three-dimensional inverted letter G - it will be a blank for the future steam locomotive.
- On the left side of the resulting blank, you need to draw an arched line with a volumetric element - as shown in the picture.
- From the bottom of the resulting blank, you need to draw an isosceles trapezoid, the lower edge of which will hold 3 wheels (of different sizes).
- The resulting blank must be worked out by adding details: a pipe, a roof for the driver's cabin, a window. If desired, you can add various decorations to the main part of the locomotive.
- It is also necessary to draw the coupling device and the boiler.
- When the train is ready, you can start coloring it. It is necessary to apply a light layer of a bluish tint to the entire drawing.
- When the water has dried slightly, you need to create light streaks with a small amount of blue paint on the driver's cabin window.
- The main part of the resulting locomotive, not counting decorative elements and other details, must be painted in a gray shade.
- A more active shade of gray should be added to the wheels, coupling device, pipe, roof and boiler of the locomotive.
- The star on the locomotive can be worked in any color. Red can be used as a bright accent.
If desired, you can add an additional carriage or leave the drawing as is. You can also work on the free space around the resulting image, add shadows or additional elements.
A steam locomotive is a rather complex device that is difficult for children to draw. To simplify the task, you can use an animated style - drawing characters from animated series or cartoons. The most popular character is Thomas the Tank Engine.
As a basis for his image, you can use any of the instructions, but instead of the front part, you need to depict the face. Also, the hero has a characteristic coloring, which must be taken into account when working on the image.
Video about drawing
Steam locomotive drawing for kids: