Women's sleeveless jacket knitted with knitting needles. Patterns with description, sizes

Beautiful women's sleeveless jacket – a warm and fashionable item that is present in the wardrobe of many fashionistas. A knitted item will emphasize individuality or add a bright accent to the image. A vest is a great alternative to a sweater, and in combination with a blouse, turtleneck or shirt it looks stylish and beautiful.

Classic sleeveless jacket with buttons

Women's sleeveless jacket (knitted) is made in a classic style. For sizes 38/40 and 44/46 you will need 650/700 g of pure wool yarn of a milky shade (in 120 m - 50 g), straight and ring knitting needles No. 3.5 and 4, as well as 7 buttons and a hook No. 4.

Knitting density of the braid motif: sample 10x10 cm. knitted from 30 sts and 34 rows.

The products are knitted with the following patterns:

• Face jersey.
• Back side fabric.
• The motif with 20 sts wide cables is woven on knitting needles No. 4 according to the diagram. It shows only the front tiers, the back tiers are to be done according to the pattern. Reproduce the rapport links from rows 1 to 32.
• The elastic is formed with rods No. 3.5 by alternating 2 purl sts with the same number of knit sts.
• Crochet the arches: Row 1 - sc, 2nd level - * 1 sl st, then skip 2 sts, 5 dc in the last cell, skip 2 sts, repeat from *.
• Fastener strip. From the front side, transfer half of the edge st to the knitting tool. Weave 3 rows with the front fabric, in the 4th row (purl level), set the links aside. From the back side, transfer the 2nd part of the edge arches to the rod and knit in the same way. Then make 1 level of front sts, while knitting 1 st from the front surface and 1 st from the back together. Next, decorate 7 rows with an elastic band, at the same time, evenly make 7 openings for the fittings in the right bar (finish 2 sts, and string them on again in the next tier). At the end, shorten all the arches.
• Armhole strips. Knit like fastener sides, but on the 2nd level set aside 4 sts on both sides and at a distance of 6 cm knit another 1 cm on all links.
• Neck piping. Knit like a fastening strip, but string the arches to the beginning of the sides.

Procedure:

1. For the back, string 142/162 sts with a “braid” motif. After 58 cm from the bottom of the product, reduce the central 32 sts for the neckline, and finish both parts separately. From the edge where the neckline is, decrease every 2 rows 2x7 sts. At a distance of 60 cm from the bottom, reduce the arches of the shoulder cuts.
2. For the right front half, string 66/77 sts and braid starting from mark A. Having knitted 50 cm from the bottom edge, on the right side reduce for the neck opening 1x8 sts, then in every 2nd row 1x7 sts, 1x5 sts, 1x2 sts and 4x1 sts. Having knitted another 10 cm, finish the rest of the links.
3. Design the left half symmetrically to the right piece.
4. The assembly of the sleeveless jacket consists of sewing the shoulder sections. Along the edges of the armholes (24 cm on each shoulder side), make a set of 106 sts on ring rods and design the strips using the technology described above. Along the front edges of the shelves, make a set of 128 sts, and along the neckline - 106 sts, then weave the piping and the strip using the above technique. Sew the sides and the edging of the armholes.
5. All edges are processed with arches.
6. Sew on the fittings.

With braids

The vest with braids is presented in sizes 38-42-46-50. For work you should buy 300-400 g of yarn (60% cotton, 20% polyacrylic and wool, 100 g - 250 m), as well as knitting needles No. 4.5 and 5.

The item is knitted using the following techniques:

• Patent pattern. In width, repeat the rapport = 10 sts, and in height, reproduce from rows 1 to 4. In the purl tiers, weave the links according to the pattern;
  
• The "braid" ornament is made according to the established pattern. You should make 1 row in width by 26 sts. Repeat upwards from the 1st to the 12th levels;
  
• The elastic band is formed by alternating purl and knit stitches (1x1).

The density of the weaving of the patent motif is: in the sample 10x10 cm. 33 rows are knitted from 18 sts.

Registration procedure:

1. For the back, on tool #4.5, cast on 69-75-81-87 sts, then knit 1 row purlwise.
2. Next, weave 4 sts with an elastic band, in the last line evenly add 27/29/31/33 sts. You will get 96-100-112-120 sts.
3. Continue working on knitting needles No. 5, distributing the pattern cells as follows: edge, 34-38-42-46 sts of the patent motif, then 26 sts in “braids”, repeat the patent pattern again for the same number of loops, edge st.
4. After passing 23 cm from the elastic, to shape the armholes, first reduce from 2 sides through 2 rows 1x4 sts, and 2x3 sts. 76/84/92/100 sts remain.
5. Having knitted another 10-14-18-24 rows, you should add 6x1 st in each row from both edges. You will get 88-96-104-112 sts.
6. At a distance of 20/21/22.5/24 cm from the beginning of the armhole design for shoulder slopes, decrease 7/5/3/1x3 sts and 0/2/4/6x4 sts from 2 sides.
7. On the remainder (46-50-54-58 sts) knit another 4 cm according to the pattern, then switch to knitting tool No. 4.5, knit 4 rows with an elastic band and finish the work in one go.
8. The front panel should be designed in the same way as the back.
9. To assemble, sew the shoulder (+ collar) and side seams.
10. Along the edge of the armhole, string 90-96-102-108 sts and knit 4 rows with an elastic band, then close the links with the front stitch.

With arans

Women's sleeveless jacket (knitted) with arans and a large collar looks original and beautiful. Such a product is a worthy option for a stylish wardrobe. For sizes 40/50 you will need 700/850 g of merino yarn (in 50 g - 120 m), straight knitting needles No. 4 and 4.5, ring knitting needles No. 4, and also a hook No. 3.5.

Patterns used:

Name	No. of needles	How to perform
Rhombuses	4	The number of loops is a multiple of 18 + 2 edges. Knit according to pattern No. 1, perform purl rows according to the pattern. Knit a rapport in the middle, and design loops before and after it on both sides. Repeat 1 row from 1 to 26 rows, then from 3 to 14 rows. Total 38 rows.
Braids	4.5	The number of links is a multiple of 36 + 2 edge. Knit in the same way as the “diamonds” motif, only according to pattern 2. Repeat the pattern from rows 1 to 12.
Fantasy	4.5	The number of cells is a multiple of 36 + 2 edge. Weave similarly to the previous drawings, but according to instruction 3. Reproduce 1 time from 1 to 72 rows.
Rubber
2x2		Alternate 2 knit stitches with 2 purl stitches.
1x3		Play 1 front st, then 3 back sts.

Sequence of knitting patterns:

• braids – 36 p.;
• fantasy - 72 p.;
• braids - 42/48 p.

Weaving density in a 10x10 cm sample:

Number of cells	Number of rows	Name of the motive
30	31	harnesses and fantasy
27	31	braids on top
30	31.5	rhombuses

Procedure:

1. For the back panel, string 146/182 sts onto the tool and weave 38 rows (12 cm) for the strip with a diamond pattern. Then continue the work with the above-mentioned alternation of motifs.
2. After passing 144/150 rows (46.5/48.5 cm) from the end of the bar, reduce for the shoulder slope on both sides 9/13 sts and after 2 rows 3x6/13 sts.
3. After knitting another 2 cm, to shape the neckline, complete the central 74/78 sts.
4. Knit the front part in the same way as the back panel, but make the neck deeper. To do this, at a distance of 134/140 rows (43/45 cm) from the strip, complete the middle 24/28 sts and finish both segments separately. To round off, decrease from the inner side in every 2nd row 1x6 sts, 1x4 sts, 5x3 sts.
5. Assembly consists of sewing the cuts along the shoulders and sides, leaving the top 20/25 cm of the side seams open for the armhole opening.
   
6. Thread 132/164 sts onto circular needles along the armhole edges and knit with a 2x2 rib pattern. After 6.5 cm, decrease all the links according to the pattern. Fold the strips in half inward and sew.
7. For a wide collar, cast on circular rods along the front edge of the neck - 44/81 sts and along the back - 63/67 sts. Work with a 1x3 elastic band. After knitting 3 cm, make an extension: after every 2nd strip, add 1 front st and a crossed cross thread from the front sts, knit these cells in the front way in the following tiers. Also, after passing 3 cm, make such increases. You will get 175/185 sts. At a collar height of 16 cm, shorten the links according to the pattern, turn the collar outward.

With a hood

A women's sleeveless jacket, knitted with knitting needles, is suitable for wearing at home and outside. Especially if it is a stylish vest with terry cloth and a hood.

For sizes 38-42-46 you need 90-1000-1100 g of milk wool yarn (in 100 g - 200 m), ring rods No. 3.5 and straight knitting needles No. 7. The main ornament is pearl, which is created by this method: 1 front p. and 1 out. p. In the next tier, it is shifted by 1 p. The weaving has a density: a fragment of 10x10 cm is knitted from 13 p. and 24 rows.

The peculiarity of the product is that it is made in 2 threads.

Design technique:

1. For the back panel, use knitting tool #7 to cast on 70/76/80 sts in two threads and weave with a pearl motif.
2. At a distance of 45 cm from the bottom edge, make marks for the armholes on both edges.
3. After passing 20-21-22 cm from the marks, reduce from both edges for the shoulder slopes 1x4 sts, 1x4/4/5 sts, 2x3/4/4 sts, and 2x4 sts. 26/28/30 sts will remain.
4. At the same time, having completed 3 cm from the beginning of the shoulder, for the neckline decrease the central 18-20-22 sts and complete both segments separately.
5. To round the neck, reduce from the inner side through 2 rows 2x4 sts. Finish the other edge symmetrically.
6. The front panel is woven in the same way as the back, only the neckline should be made deeper. To do this, at a distance of 19-20-31 cm from the armhole mark, reduce the central 8-10-12 sts, after which the halves are finished separately.
7. To round the neck, remove 2x3 sts, 1x2 sts and 1x1 sts along the inside edge in every 2nd row.
8. Design the shoulder as on the back panel, knit the other part symmetrically.
9. For the hood, string 68-72-76 sts on straight rods and work with a pearl motif. After 30 cm from the bottom edge, leave the loops.
10. Fix the finished pieces on the pattern, moisten slightly and allow time to dry. Combine the links on the upper seam of the hood with a knitted seam. Sew up to the marks on the shoulders and sides, leaving the sections at the bottom unsewn (20 cm in size). Attach the hood to the neck so that a free segment, 8 cm wide, remains along the central border of the front between its edges.
11. For each tassel, cut 5 threads, 25 cm long, then bend them in the middle and fix them to the bottom of the product at the bend. Total number of tassels 23/25/27 pcs.
12. For 3 laces, make 4-thread sections, 60 cm long, then twist 3 bundles measuring 18 cm.
13. Create the upper tassels from 16 threads 15 cm long, bend them in half, tie at the top and attach to the cord.

Openwork

To create an openwork vest of size 38, you will need 300 g of brown yarn (80% acrylic, 20% mohair, 100 g – 550 m), and knitting needles No. 3.5.

Motifs used:

• face jersey: alternating purl and face rows;
• Patent pattern knit according to diagram 1. It shows only the front levels, knit the back lines according to the pattern. Produce in height 1 and 2 rows.
• The main ornament is knitted according to the schematic image 2, purl stitches are performed according to the pattern. Repeat from 1 to 10 rows.

Step by step description:

1. For the back, cast on 90 sts and knit with the patent motif. After 10 cm from the bottom, continue working with the main pattern. At a distance of 60 cm from the cast-on edge for the neck, reduce the central 30 sts and knit both parts separately. For rounding along the edge of the neckline, decrease 1x3 sts, 1x2 sts, 1x1 st after 2 rows. After knitting 65 cm from the bottom level, finish the work.
2. The front part is started with a patent pattern on 90 sts. At a distance of 10 cm from the bottom, the product is knitted with the main motif. Having completed 50 cm from the cast-on edge, for the neck, finish the middle 30 sts and knit both segments separately. To form roundness in each 2 rows, reduce 1x3 sts, 1x2 sts and 1x1 st. Having passed 65 cm from the bottom, complete the entire work.
3. Assembly consists of sewing together the side and shoulder sections, leaving the armhole section unsewn. Along the edges of the sleeve opening, thread loops onto knitting needles and knit 6 rows with the front fabric, then close all the cells.
4. Along the edge of the neck, cast on arches with knitting needles and knit 8 rows of jersey stitch, then finish the work.

Long

A knitted women's sleeveless jacket of size 40 will require 400 g of melange threads (60% cotton, 40% polyamide, 50 g = 120 m). You will also need straight and ring rods No. 5, 1 large mother-of-pearl button and a hook for forming a loop No. 4.5.

Motifs used:

• The diamond pattern is made (the number of cells is a multiple of 22 + 1 + 2 edge) according to the diagram below. It shows the front tiers, and the back tiers are knitted according to the pattern. Knit 1 time from the 1st to the 92nd tiers, then repeat 21-92 rows all the time. When making decreases, make sure that the number of yarns and arches knitted together matches.
• Garter stitch on straight needles: knit all lines in knit stitch.

Sample 10x10 cm is knitted from 19 sts and 25 rows.

Procedure:

1. For the back, make a set of 91 sts and knit the 1st row purl st. Continue working with motif 1. At the same time, make a decrease for the side slope on both sides starting from the 30th row from the bottom 4x1 st. – 83 sts will remain.
2. Having passed 65.5 cm from the bottom edge, for armholes, reduce 1x3 sts from both edges, then after 2 rows 1x2 sts and 1x1 st. You will get 71 sts.
3. At a height of 85 cm from the starting level, for the neckline, reduce the central 25 sts and complete both parts separately.
4. To round off along the inner border, decrease in every 2nd row 1x2 sts and 1x1 sts.
5. Having completed 87 cm from the bottom, finish the remaining 20 sts along the shoulder.
6. For the left side, string 47 sts on knitting needles and knit the 1st row of front sts. Continue working with pattern 1. Design the armhole and side bevel on the right side in the same way as the back.
7. Having knitted 58.5 cm from the 1st tier, reduce for the neck along the left edge 1x1 st, then in every 4th row 16x1 st. At the height of the back panel, complete the 20 remaining cells.
8. Weave the right shelf in the same way, only in mirror image.
9. Assembly consists of joining the side sections. Along the sides of the shelves and the edge of the neck, string 292 sts on the knitting needles and knit 6 rows with motif No. 2, knitting the 1st row out of p. In the next tier, close the loops with the front method.
10. Next, sew the product along the sides. Cast on 72 sts along each armhole and weave 6 ring lines using pattern 2, while making the 1st row out. st. Then finish all the links using the out. method.
11. On the right shelf (below the neck), hook the fiber and knit 5 ch from it and fix the chain 2 cm below. On the other half, sew the fittings opposite the loop.

Large size

A women's sleeveless jacket, knitted with knitting needles, will create a stylish image for plump women. For size 50, you need 500 g of acrylic yarn (in 100 g - 450 m), hook No. 3 for binding and knitting needles No. 3.

The product is woven with the following patterns:

• garter stitch (all tiers are knit);
• Face jersey - alternate knitting of front and back rows;
• openwork pattern knit according to the pattern, on cells, the number of which is a multiple of 13 + 2 edge sts. The image shows only front rows, in the back lines all yarn overs and links are knitted out of st. Repeat 1-12 rows.

In a 10 x 10 cm sample there are 19 sts and 24 rows.

The sleeveless jacket is decorated with a double-stranded thread.

Procedure:

1. For the back, cast on 104 sts and knit 2 rows with garter stitch, then continue the work with an openwork motif.
2. After passing 50 cm from the edge, reduce on both sides for armholes 1x4 sts, then in each 2nd row 1x3 sts, 1x2 sts, 4x1 sts.
3. At a distance of 10 cm from the formation of the armhole, knit 4 rows of face jersey, simultaneously decreasing 44 sts in the 3rd row. Complete the work.
4. Knit the front panel in the same way as the back.
5. Assembly consists of sewing together the side cuts.
6. Crochet the top edge of the back and front with 5 rows of sc.
7. For the straps on the front piece, secure the thread and weave a strip of sc 20 cm long on the outer 6 cells. Sew the straps to the back piece.
8. Braid the neckline and the edges of the shoulders inside with 1 row of sc, and the edges of the armholes and the outer edges of the straps with 2 rows of sc.

Knitting patterns for women's sleeveless jackets

Winter options involve the use of warm yarn and a denser pattern. The most popular among them are braids or arans. Products with large plaits on the front and a simple front or back stitch look beautiful.

Cute diamonds will help create a casual look or complement an office outfit.

Light patterns made from thin threads or in the form of a flat cloth are suitable for the warm season.

For the summer, they also weave items with openwork patterns.

Yarn overs help to add elegance and femininity to a garment.

The schemes are divided into several types:

• large or small leaves;
  
• small reliefs made with the help of yarn overs create mysterious designs;
  
• diamonds, possibly with the addition of miniature braids;
  
• various attractive figures;
  
• original "migratory birds";
  
• zigzag ladder;
  
• The elastic is sometimes replaced by a border. It is not knitted at the end of the work, but the main weaving begins with it.

Vests are also knitted using the following techniques:

• with large knitting needles made of thick threads;
• in jacquard style;
• made of fleecy fiber (like grass);
• pearl knitting;
• boucle pattern;
• face jersey with inclusion of multi-colored stripes.

A comfortable women's sleeveless jacket is a convenient and practical garment that goes perfectly with clothes of different styles. Beginners and professionals can create a knitted item. Following the step-by-step description, even beginners have the opportunity to weave a beautiful thing.

Video about making a women's sleeveless jacket with knitting needles

Knitted sleeveless jacket for women with knitting needles: