DIY ribbon flowers. Interesting step-by-step master classes with photos and videos

In recent years, making flowers from ribbons has become especially popular among needlewomen. You can decorate your home or workplace with ribbon flowers, such decorations are often used to decorate clothes, and a panel will be an excellent gift for loved ones. Of course, such decorations can be found on the open market, but making flowers from ribbons yourself is much more economical.

Features of making flowers from ribbons

Making flowers from ribbons is not a difficult section of handicrafts, but to achieve a good result It is important to remember several features of this art:

• Before starting work, it is necessary to melt the edges, you can use a regular lighter or a candle flame, this will prevent the ribbon threads from fraying and maintain a neat appearance.
• A rose made from a single ribbon will look visually voluminous, but flat, which will allow you to place it anywhere.
• A gelatin bath will make the satin ribbons more pliable to work with.
• You can regulate the splendor of the flower: the more petals, the greater the volume.
• To help soft fabric ribbons hold their shape better, they can be treated with strong hold hairspray.

Rose from a whole ribbon

The most common and recognizable flower is the rose. Experienced specialists recommend starting work with fabric flowers with a rose made of a whole ribbon.

To work you will need:

• Scissors.
• Needle and thread to match the ribbon.
• The tape is 3 centimeters wide.

Process algorithm:

1. The corners of the tape are folded towards each other.
2. Next, the upper corner of the tape is lowered back to the lower corner.
3. The core of the flower is formed by twisting.
4. When there is no more than a centimeter left on the bent side of the tape, the tape is rotated 180°, forming a new angle and the twisting continues again.
5. The action continues until the end of the tape length.

A rose made from a single ribbon will be a great decoration for headbands or outerwear.

Quick Making of Simple Flowers

Simple flowers can be no less impressive and are suitable for decorating hats or memorable gift cards.

Here is a simple instruction on how to make flowers from ribbons with your own hands:

1. The selected ribbon is worked with a simple stitch along the bottom edge.
2. Using a thread, the ribbon is collected and twisted into a spiral.
3. The center is secured with thread or glue.

Textured flower made of braid

A distinctive feature of the tape is its durable structure. Such a tape will perfectly hold its shape, and the structure of the fabric will create a unique texture for the product. You can work with the tape using any technique. The simplest and most accessible technique is the accordion tightening technique.

This requires a zigzag ribbon 20-30 centimeters long, the lower edge of which is processed with a stitch along the lower peak point of the decorative element of the braid. The thread is tightened, gathering the braid into a neat flower. Professionals recommend choosing thick threads for working with braid, to avoid breaking when tightening the braid. The center of the flower can be decorated with a decorative button or stone.

Delicate flower made of lace ribbon

Lace flowers have a special sophistication. Such a product is always very delicate, voluminous and extraordinary. For a lace flower, professionals recommend using the simplest technique - tightening. For work, any lace is prepared, about 2 meters long, a needle and thread in the tone of the lace cut and a fleece backing. The lace is processed with a gathered seam along the edge and tightened with a thread.

Experts advise making stitches as small as possible, this will give texture to the flower and make the assembly more durable. A lace flower will be very relevant in hair decorations or scrapbooking.

A lush scarlet flower

A lush scarlet or red flower will always become a bright accent in any composition, and it does not matter whether it is a wardrobe item or a gift item.

Scarlet color is ideal for the brightness of the decorative element. But how to achieve splendor? Organza fabric or airy lace will do for this task. Due to the greater number of layers of fabric, the flower will acquire the necessary splendor and volume.

Flower from kanzashi ribbon

Products made using the kanzashi technique are among the most popular today, but they are also quite labor-intensive for a beginner.

Features of the kanzashi technique:

• In the traditional kanzashi technique, medium-density satin ribbons are used, but if you don’t have one, you can use rep ribbons.
• The elements of the composition (petals, leaves, seeds, etc.) are processed separately and only then assembled together.
• A thicker fabric will be easier for a beginner to work with.

Following this simple instruction you can easily create kanzashi flowers from ribbons with your own hands:

1. The tape is cut into squares. The number of squares is equal to the desired number of petals in the flower.
2. The square piece is folded diagonally to form a triangle.
3. Now two diagonal knots are folded towards the central one and secured with a double stitch.
4. The resulting structure is turned over and the 2 side corners are folded.
5. The petal is folded vertically so that the corners are inside.
6. The bottom corner, which was grabbed with thread, is cut off evenly.
7. The free edge is sealed with a candle flame or a hand lighter.
8. The resulting petals are fastened with thread to form a flower.

In this technique there are 2 types of petals: the rounded and pointed ones described above.

The pointed petals for kanzashi flowers are made using a similar pattern:

1. Squares are prepared from the ribbons and the corners are folded diagonally, forming a triangle.
2. The resulting triangle is folded twice.
3. The corner with free edges is cut and partially melted if it is necessary to obtain a petal with a hole, and completely if the petal should be without a hole.
4. Using thread and a needle, the petals are collected into a flower.

By combining petals of different sizes and colors, you can create a unique decoration. Kanzashi flowers will be relevant everywhere, from decorating clothes to decorating the interior of the room.

Organza flower

Flowers made of organza are no less spectacular. The structure of this material allows the products to be airy and voluminous at the same time. The simplest technique to work with organza is the single ribbon technique. When the working fabric is not cut into separate elements. Organza is stitched along the bottom edge with a thread and gathered. For maximum effect, such ribbons are laid in several layers.

In general, professionals create flowers from organza in any technique. But whichever option is chosen, it is important to remember that such fabric requires more layers. But the flower turns out very elegant and unusual.

Poinsettia

The poinsettia flower can be made according to the canons of kanzashi, and also assembled from petal blanks. In any technique, poinsettia made of ribbons looks spectacular, the main thing is to observe the bright scarlet color scheme.

Dahlias

For dahlias, the ideal solution would be to use the kanzashi technique. Experts recommend using petals of several shades, this will give the flower the necessary visual volume. Dahlias look most harmonious on hairpins and home textiles.

Hibiscus

Most specialists use the kanzashi technique to create hibiscus. Such flowers look good on three-dimensional paintings or clothing elements.

Aster

Aster is a flower that everyone loves and is familiar with since childhood. Aster made of ribbons can become an unusual hair decoration or replace fresh flowers in a vase.

Here is a simple instruction on how to make asters from ribbons:

1. A 2.5 cm wide satin ribbon is cut into 50 strips of 5 cm each.
2. The piece is laid out lengthwise and the corners are folded towards the center. Visually, this structure looks like a hut.
3. Next, the resulting triangle is folded in half lengthwise.
4. The side elements are folded until a tube of tape is formed.
5. Now, using glue, all the petals are secured to the bead base.
6. At the final stage, the entire structure is attached to a felt backing.
7. The peaks of the petals can be decorated with glitter in the same color as the fabric of the petals.

Chamomile

For a daisy made of ribbons, ribbon cuts are prepared. The width of the ribbon should not exceed one and a half centimeters. The length can be any, but experts do not recommend preparing ribbon cuts longer than 4 centimeters.

Depending on the desired density of the flower, you will need to prepare an average of 20 pieces with a rounded edge.

The petals are laid out in a circle on a felt backing. The recommended diameter of the backing is 3-4 centimeters. For the best result, after laying out the petals, the center of the flower is draped with velor fabric.

Sunflower

The most relevant technique for creating a sunflower is kanzashi. For work you will need a 5 mm thick brown satin ribbon, a 1 cm wide green grosgrain ribbon and a yellow satin ribbon for the petals.

Instructions for making a sunflower flower from ribbons with your own hands:

1. A brown ribbon 3 meters long is gathered lengthwise onto a thread and pulled tight, resulting in an accordion ribbon about 40 cm long.
2. The grosgrain tape (1 meter long) is folded in half lengthwise and also strung onto a thread and tightened.
3. And the kanzashi petals are collected from satin ribbon; you will need about 40 pieces.
4. A flower is assembled from the resulting elements on a felt base: petals are attached to the edges in 2 rows with glue, and the middle is laid out with green and black prefabricated ribbons imitating sunflower seeds.

Callas

Creating calla lilies from ribbons does not require much effort and time, and the result exceeds even the boldest expectations. You need a white satin ribbon 9 centimeters long and 5 centimeters wide.

Step by step instructions:

1. The wide edge of the ribbon is folded towards the base, forming a wide triangle.
2. Next, the lower corners of the triangle are connected.
3. The free edge is cut and soldered.
4. The workpiece is turned inside out and takes on a characteristic domed shape.
5. Now, using a square of green satin ribbon, make a calla leaf.
6. The calla bud is threaded through a pre-made stamen. The ribbon calla is ready.

Poppy

For the poppy flower you will need a scarlet satin ribbon 5 centimeters wide and 24 centimeters long. The ribbon is divided into 3 parts. Each of the parts is folded in half and a petal is cut out, while the side of the fold of the fabric is not cut. The petals are laid out, forming a dome-shaped bud. Black beads or rhinestones are fixed in the center.

Bell

Bright blue bell flowers are ideal for home decoration or hair accessories.

It is quite easy to make such flowers from ribbons with your own hands, the main thing is to follow the instructions provided:

1. From a blue satin ribbon 2.5 cm wide and 18 cm long, 6 blanks in the shape of an elongated triangle are made.
2. The bottom edge of the triangle is gathered with a simple stitch and tightened.
3. The upper free edge is heated by the flame and takes on a semicircular shape.
4. The petal blanks are collected into a bud using a thread.
5. Pre-prepared stamens are placed into the flower.

Sakura

A composition of sakura flowers will be a great decoration for any home interior. It should be noted right away that for aesthetic appeal there should be at least half a dozen flowers. Sakura from ribbons can be made in various techniques.

Here is one of the most popular methods among beginners and professionals:

1. Heart-shaped petals are prepared from white or pink ribbon. To make the work easier, specialists often use paper stencils.
2. The edges of the petals are burned and attached in a circle using threads in the same tone. The center of the flower can also be decorated with a bead or rhinestone.

You can make a branch from thick wire and black tape and place flowers on it.

Narcissus

The charming spring flower narcissus is a favorite of many women.

To create this ribbon flower you will need:

• White satin ribbon
• Yellow satin ribbon
• Scissors
• Lighter or candle
• Tweezers

Petals from white ribbon are made using the kanzashi technique with a pointed edge. You will need 6 of these petal blanks. The yellow core is also made using a similar technique, only now you will need 3 rounded kanzashi petals.

The stamen for the narcissus is made from thin wire, draped with white paper. Cotton wool is wound at the end, imitating the shape of the flower's stamen. White petals are fastened in a circle with a thread, a stamen is threaded into the base, and 3 yellow petals are formed around it.

Pansies

One of the simplest and most delicate flowers is pansies. Even a beginner can make them. To create such a flower, you will need a ribbon of blue, or any other shade of this color, 2.5 centimeters wide and 23 centimeters long, as well as a ribbon of white or cream color, similar in width and 14 centimeters long.

Execution:

1. The short ribbon is folded in half, forming a fold that will serve as a guide for the work. The blue ribbon is marked according to the same principle, but folded twice, thus dividing the ribbon into 4 equal parts.
2. The light ribbon is worked with a simple seam, the outline of which resembles an inverted letter "P", leaving one elongated side unprocessed. When the thread is pulled, the ribbon gathers, forming 2 petals.
3. The blue ribbon is stitched with thread according to the same pattern, only now two schematic letters “P” are formed, making up four petals.
4. Both pieces are fastened together with threads or glue, with the light petals placed under the blue ones.

The flower can be decorated with decorative stones or colored glitter.

Wild rose

Rose hips have long been considered one of the simplest, but at the same time very beautiful plants.Decorating with a branch of everlasting rose hips is quite simple; all you need is a sheet of squared notebook paper, scissors, a meter of satin ribbon, glue and thick threads for the core.

Step-by-step instructions for creating rose hips from ribbons:

1. Three sizes of stencils are cut out of paper. The stencils resemble a heart shape, only the lower corner is missing.
2. Using stencils, petals are cut out of the tape. The edges of all petals are processed with flame.
3. While the edges are hot, peculiar waves are formed on the petal.
4. Small petals are folded in a circle in a checkerboard pattern and fixed in the center. The following layers of petals are fixed in the same way and each subsequent layer is created from smaller petals. The stamens can be made from thick yellow threads, collected in a bunch.

Semitsvetik

An unusual and bright seven-flower flower will become a bright accent in decorating children's clothing and accessories, and is also suitable for ribbon panels or memorable cards. Such a flower can be made in absolutely any technique and on any materials, the main feature is petals of contrasting colors.

Flower wreath made of ribbons

In recent years, flower crowns have become especially popular. This headdress can decorate not only a young beauty, but will also become a romantic addition to the image of an adult girl.

A wreath made of ribbons is easy to make:

• A thick wire 58-60 centimeters long is covered with a ribbon. If a wreath-rim is made, then a traditional plastic rim is draped with a satin ribbon of the desired tone.
• In accordance with the designer's idea, flowers and decorations are placed on the work surface. It is better to fix them with hot glue, sewing needles or threads. For the wreath, it is recommended to use flowers with a wire base, which can then be easily attached to the base of the wreath and hidden with a ribbon in the same color.

Imitation berries or wild grasses can be added to the design.

Wedding bouquet made of ribbons

On one of the happiest and most unforgettable days in a woman's life, everything should be perfect. Particular attention will be drawn to the bride's bouquet on the wedding day. A ribbon bouquet can be a substitute or become the bride's main accessory.

Today, it is quite easy to buy parts for a wedding bouquet in specialized stores, but knowing how to make a flower from ribbons, You can make a unique bouquet with your own hands:

1. Flowers are prepared according to the above-described schemes. You can choose any flower, but experts recommend using flat-shaped flowers.
2. Bouquet base: Cut off 2/3 of a cardboard form from under foil or baking paper, put 5 toothpicks in the base. Then divide the foam ball (diameter about 12 centimeters) with a knife into 2 equal parts. Attach the foam hemisphere to the cardboard base with toothpicks.
3. For reliability, the resulting structure is pasted over with satin ribbon. The ribbon will give an aesthetic finish, and flowers are much better attached to the ribbon.
4. The handle of the bouquet can be wrapped with any ribbon or lace. Florists do not recommend covering the middle of the handle with voluminous decorative elements, because such a bouquet will be uncomfortable to hold in your hands all day.
5. Prepared flowers and decorations are attached to the hemisphere. To be on the safe side, in addition to the oil, it is recommended to attach the flowers with sewing basting needles. The composition can be decorated with rhinestones, a decorative chain or beads.

Such a bouquet will definitely not fall apart at the most inopportune moment and will delight its owner for many years to come.

Video tutorials on how to make ribbon flowers with your own hands

How to make roses from ribbons with your own hands, find out in the video:

Wedding bouquet made of ribbons, watch the video: