How to knit a collar for a woman, boy, girl. Patterns and descriptions. Step-by-step knitting instructions for beginners

A fashionable and warm bib looks like the top of a sweater or a cape with a collar. A bib made with knitting needles is an alternative to a regular scarf, and the diagram and description for women will help in the work. The wardrobe item is extremely comfortable to wear and reliably protects against hypothermia.

It is worn with a spring jacket or coat and a winter down jacket, with a light raincoat and cardigan, over a dress or pullover. In any case, the bib makes the image perfect and emphasizes individuality.

The bib is a great solution for winter walks and sledding or skiing. It is often complemented with gloves, a hat or a headband made of the same yarn with repeating fragments of the pattern.

Rules for knitting a collar

Before you start knitting a warm and comfortable collar with knitting needles, you need to familiarize yourself with the patterns and descriptions for women and arm yourself with the following basic rules:

• The knitted collar should be dense to keep its beautiful shape longer.

• The yarn is selected from natural fibers with a small addition of synthetics.
• The material should be soft and pleasant in contact with the skin.
• The knitting needle size is chosen to be twice as thin as the yarn or half a size smaller than recommended, so that the fabric turns out dense.

• A solid bib, without buttons or fasteners, is knitted starting from the neck.
• To calculate the required number of loops, you need to know the neck circumference in centimeters. Add 2-4 cm of circumference to the obtained value for a free fit.
• In some cases, the edge of the bib is crocheted using double crochet stitches. This makes the edge more rigid and does not curl when worn.
• To obtain a seamless fabric, you need to use double-pointed or circular knitting needles.
• It is better to choose children's models with a fastener on the side. This way, the bib will be easy for the child to put on, especially since children do not like this process.
• The Italian method of casting on stitches can be used to increase the elasticity of the collar edge.

Children's bib for a girl. Instructions, diagram with description

The choice of yarn for making a children's item should be approached more carefully. It is recommended to use natural, soft threads that do not cause allergic reactions and skin irritations.

Knitted baby bib

The collar is made with garter stitch, where the stitches in the front rows are knitted as front stitches, and in the back rows - as back stitches. The number of stitches on the needles should be even and divided into 3 parts. For the raglan, 4 more stitches are added. First, the neck is knitted with a single or double elastic band. The length should be sufficient to fold in half.

Then the entire volume is evenly divided into 4 parts. The back is once again additionally divided into two parts, which begin and end the fabric. In the process of knitting, a yarn is made before and after the raglan loop.

There are four such places. At the required length, the loops of the shoulder parts are closed. The back and front are knitted further from the individual balls. When they are sufficient to close the back and chest, the loops are closed.

The edges of the product are decorated with scallops or lace using a crochet hook. You can use contrasting yarn and add applique.

A smart knitted collar for a girl

An experienced knitter can make such a collar with knitting needles using patterns and descriptions for women in a couple of evenings.

What to cook for knitting:

• Yarn made from a mixture of wool and acrylic
• Circular knitting needles or double pointed needles #2 and straight needles #3
• Hook for making decorations

Any elastic or relief pattern will do for the main pattern. The description uses a uniform "Snowball" pattern.

Scheme for making the "Snowball" pattern

If you follow the pattern exactly, you can get the “Snowball” pattern.

Scheme of work

The knitted bib is made from 2 parts according to the diagrams and descriptions. It will not be difficult for women to sew them together along the shoulder seam. The size of the knitted fabric depends on the age and height of the baby. The chest volume and the width of the back are taken into account.

You should start with a small double elastic on knitting needles with a larger number than the pattern. The loops cast on should be a multiple of 3 (pattern repeat). To this volume, 2 additional loops and 2 edge loops are added.

When knitting the neck and decreasing the stitches, it is important to remember that the neckline should be deeper in the front than in the back. The shoulder seam can also be finished with a double elastic band. You will get something similar to shoulder straps. After connecting the parts together, you need to pick up stitches along the neckline and knit the collar. Decorate the edges with crochet double crochets.

Men's bib for beginners. Instructions, diagram with description

The technology of knitting a collar with knitting needles for men, thanks to the diagrams and descriptions, is simple and accessible to female craftswomen.

For work you can use 2 and 5 knitting needles, depending on your desire and availability.

When using 2 knitting needles, it is necessary to add 2 loops for the edge to the calculated number when casting on. This is where the division into the front and back sides occurs.

When knitting in the round - only the front side. The seam is located along the raglan line on the back. Using 5 needles will help to avoid seams.

You need to prepare:

• 2 skeins of wool yarn (110 m of thread in 100 g)
• Circular knitting needles No. 4 – 5 pieces
• Hook #4

Scheme of work

You need 72 working loops for work. Knit a 1x1 elastic band to a height of 19 cm. Next come 4 rows of stocking pattern. Divide the fabric into 4 parts that will cover the shoulders, chest and back. Put a mark with a bright thread on the border. A pair of front loops remains at the junction. On both sides of them, loops will be added through a row.

The first knitting needle will be the shoulder. We start knitting it with 2 front loops and a yarn over, then 10 front loops, a yarn over and 2 more front loops. On the second knitting needle, we knit the back as follows: a yarn over, 20 front loops, a yarn over. The third knitting needle with the second shoulder is knitted similarly to the first. On the last, 4th knitting needle, there is the chest part with a braid pattern. In the first row, we make a yarn over and knit 3 front loops.

The next fragment is repeated 4 times: 1 st. purl knitting, the 3rd st. from the left knitting needle is knit and put it on through 2 loops, then a yarn over and 2 sts. knit. Finish the row with 1 purl. 3 knits and a yarn over. In the next, second row, knit 4 knits. Repeat 1 purl + 3 knits 4 times. At the end - 1 purl and 4 knits. The fourth row begins with 5 knit loops.

The block, repeated 4 times, consists of 1 purl and 3 front loops. At the end there should be a purl and 5 front loops. Repeat the pattern from rows 1 to 4. Knit a "braid" in a circle 14 cm. After this, the loops of the shoulder parts and the back are closed. The chest part is knitted further with a decrease along the edges by 1 loop in every 3 rows. Knitting is done on 2 knitting needles.

When only the pattern remains after the loops are reduced, the loops are closed. Additionally, the finished product is tied along the contour with double crochets.

Fashionable knitting options and patterns. Instructions, diagrams with descriptions

Among the many existing patterns, designs and models of knitted collars, every woman can choose her own option and show her imagination.

Openwork collar with knitting needles using rotary knitting

The peculiarity of knitting such a product is the change in the direction of knitting. The fabric is built up not in the vertical direction, but in the transverse direction. The pattern rapport consists of 10 rows, which corresponds to the formation of one strip with a tooth along the edge. Then the rapport is repeated until the required length of the product is knitted.

To work, you will need regular or circular knitting needles and medium-weight yarn to make the pattern look more textured.

To make the women's model, you need to cast on 67 stitches, including 2 edge stitches.

Pattern diagram

The names of the points in the pattern correspond to the number of the knitting row:

1. Slip the first edge stitch. Then knit 40 knit stitches and 12 purl stitches and 1 more knit stitch. Repeat the next block 6 times: 1 yarn over, 2 together knit stitches. Finish the row with a yarn over and 1 purl stitch.
2. Remove the edge stitch. Knit 27 sts knitwise and 1 st purlwise. Turn the unfinished row to the other side.
3. After the edge stitch, knit 12 purl and 3 knit stitches. Repeat 6 times - 1 yarn over and 2 sts together knitwise. Make a yarn over and 1 purl stitch.
4. Slip the first stitch. Work 29 knit stitches and 1 purl stitch. Turn the needles.
5. Slip 1 st, 13 p+4 k. Yarn over and knit 2 together 6 times. Finish with yarn over and purl.
6. Except for the edge stitches, knit all stitches in this row.
7. After the edge stitches, there are 40 front loops. Block of yarn over and 2 sts together, repeat front 14 times. At the end, yarn over and purl.
8. Edge, 31 knits and 1 purl at the end. Turn knitting.
9. Remove edge stitch. 31 knits + 1 yarn over + 1 purl.
10. Close 5 loops at the beginning of the row. Then knit 13 front and 13 back. Continue the row with front loops. The last one is a back loop.

The description of each row is different, so you need to follow the pattern when knitting.

Collar-bib for girls

The collar-dick is used instead of a regular scarf and as a warm decoration. First, you need to select yarn and the appropriate size of knitting needles. When using circular knitting needles, you do not need to sew the product. Determining the required number of loops is very simple. The neck circumference should be multiplied by the number of loops per 1 cm in the sample with the selected pattern.

After determining the size of the product, dial the calculated number of loops. For knitting, use English elastic or any other volumetric pattern. The length of the product corresponds to the double height of the neck. The finished rectangle is folded in half and sewn with a thread of the same yarn. Decorate the product with buttons, a knitted flower or a brooch.

Patterned bib

The L/XL bib will have a finished height of 44 cm, a neck volume of 84 cm and a shoulder circumference of 112 cm. You will need to buy 400 g of yarn and prepare circular knitting needles. The knitting density for a 10x10 cm sample is 11 loops per 15 rows, knitted with the front surface.

Knitting tips:

• The product begins and ends with a 2x2 elastic band 2 cm high.
• Knitting direction is from bottom to top.
• The transition from the neck volume to the forearm is smooth and resembles the top of a bottle.
• Patterns A1 and A2 reflect the pattern in the front rows. The back rows are knitted according to the pattern.
• The principle of loop reduction. Knit 1 loop and two purl loops as one. Decrease 1 loop on both sides of the textured ornament and 1 loop between two braids (on the section of 4 purl loops) in each rapport.
• Making BUMPS. Knit 4 loops in one, knitting first behind the front then behind the back wall 4 times. Knit these loops in 4 rows with the front surface. Then transfer the 2nd loop over the first to the right knitting needle, then the 3rd and 4th, to get 1 loop at the end.

If you follow the instructions exactly, knitting the pattern will not present any difficulties.

Description

Cast on 144 stitches on circular knitting needles and knit with a rib pattern. In the purl circular row, decrease 4 stitches. Then begin the pattern according to diagram A1 with rapports of 35 stitches. As soon as the length is 22 cm, it is necessary to decrease 12 stitches. At a length of 26 cm, repeat the decrease of 12 stitches so that the total number is 116 stitches.

After 4 cm of fabric, with a finished length of 30 cm, decrease 1 loop from each edge of the pattern in all rapports. There should be 180 loops left on the needles. Continue knitting to a length of 42 cm, when about 2.5 pattern rapports have already been completed in height.

In the purl circular row, add 4 loops evenly and continue knitting with a 2x2 rib pattern. Close the fabric with front loops over the front knitting, and back loops over the back loop.

Warm women's button-down bib

To complete it you will need:

• Sheep wool yarn
• Needles No. 4 and No. 5 for circular knitting
• 4 decorative buttons of medium size

The collar is knitted in two parts. This model has a fake fastener, but you can make a real one, one-sided or two-sided. Garter stitch is used, where the first row is knitted only with face loops, and the second - with purl loops. With regular flat knitting, face loops are used in all rows.

Procedure

Instructions:

1. You need to cast on 62 stitches and knit the first row only with purl stitches on knitting needles No. 5.
2. In the second row, knit 6 loops on both sides using garter stitch, and knit a 2x2 elastic band on the remaining loops.
3. After 4 cm of elastic, start knitting the main pattern.
4. In a product 20-25 cm high, close the garter stitches along the edges. Transfer the remaining 5 stitches to a pin or an additional knitting needle.
5. Knit the other part of the product similarly to the first.
6. Once both pieces are knitted, you will need circular knitting needles.
7. You should throw 6 air loops on them.
8. Then transfer 100 stitches from the main needles and pins.
9. Finish the operation by adding 6 more air loops.
10. Continue knitting with the basic pattern until the length of the fabric reaches 30-35 cm.
11. After this, move on to knitting the elastic band on needles No. 5.
12. Knit 4 cm and close the fabric.
13. Connect the edges under the clasp.
14. Sew on buttons at intervals of 4 cm.

Thick yarn scarf-bib

Materials required:

• Yarn containing 100% merino wool
• Large knitting needles No. 19 of two types: with a small and long line
• Colored threads for marking

  

The dropped shoulder bib is offered in a universal size. It is knitted with a stocking stitch in combination with a garter stitch. The length of the finished product from the top to the bottom point is 50 cm. The length of the circumference along the neck is 60 cm. The length of the circumference at the bottom of the product is 114 cm. The distance from the bottom edge of the item to the line of the beginning of the neck is 30 cm.

Manufacturing sequence

You should start with knitting the main fabric. The set consists of 70 loops. Then we knit 3 rows of purl. We mark the place where we start knitting with a marker and make sure that the loops on the fishing line do not twist. We continue using the front surface on a section of 23 cm. Then we move on to reducing the loops to form the shoulder line.

We act in the following sequence. One front, 2 together. After that there are 29 front. We repeat as at the beginning, two together and one front. We make a mark with a marker. We repeat the decrease pattern for the previous row.

When there are 3 loops left before the marker, then we will knit two of them together and the third one with the front one.

We already have the shoulder and it's time to start on the neck. For this, you will need knitting needles with a short section of the line. We knit everything without changes according to the pattern 6 rows until 38 loops remain. Now we start knitting the neck. Its length is chosen individually. Within 12 - 20 cm, we finish knitting with 3 rows of garter stitch. Close the fabric.

Here is a knitted bib without much effort. The diagram and description for women will help in the work and is accessible for beginners.

Tips for knitting a collar

Knitting methods

The bib allows any style and pattern, but always consists of two parts: the neck (collar) and the shoulders, which cover the shoulders and chest. The collar can be narrow or high with a double lapel. A larger part goes onto the chest than onto the back. The size of the shoulder is taken along the shoulder line in the standard version. In cape and poncho models it falls to the arms below the shoulders.

Most often, the collar is knitted in a circle on circular needles, starting from the top of the collar. The rules for knitting a raglan and forming a circle are used for this. You can use the principle of making a circular yoke. If a model with a thick collar is inconvenient to put on over the head, then it is better to choose an option with a side seam, into which you insert a zipper or make a button fastener.

Selecting a pattern

The choice of pattern is determined by who the wardrobe item is intended for. Girls will like flounces, bows and frills. The men's bib is made laconic. The front surface is used, knitted with knitting needles or elastic band with the addition of a pattern of braids, interlacing, arans. A relief pattern looks good.

For girls and women, the choice of a model is limited only by imagination and personal preferences. Many openwork and lace patterns, weaving and satin stitch are used. Beads, beads, embroidery, rhinestones, a beautiful brooch are suitable for decorating the bib. Experienced craftswomen should try to knit a bib with a jacquard or Scandinavian pattern.

Making a sample

The final result will largely depend on the correct calculation of the required number of loops. The collar should fit the neck, but not squeeze. For this, it is recommended to make a control sample from the selected yarn measuring 10x10 cm. The knitting pattern corresponds to the pattern of the future collar. The finished fabric is steamed to determine the degree of shrinkage of the thread.

Calculation of loops

The calculation of the total number of loops is performed in the following sequence:

1. The knitting density or the number of loops and rows per 1 cm in two directions is determined.
2. It is necessary to determine the elasticity of the sample. For this purpose, the sample is measured in width in a calm state and at maximum stretch. The stretch coefficient is obtained by dividing the first value by the second.
3. The head circumference should be multiplied by the stretch factor and the result compared to the neck circumference. For further calculations, use the larger value with an added allowance for a comfortable fit of 4 cm.
4. The knitting density by width is multiplied by the value from the previous point. The result will be the required number of loops for casting on.
5. The required number of rows for making the neckline is determined by the knitting density along the height.

Standard knitting pattern

Most models of bibs, regardless of their purpose, men's, women's or children's, use a standard manufacturing scheme.

The difference between the models for adults and children is only in the total number of working loops.

The calculated number of loops is cast on the knitting needles using any known method. Most often, the neck is knitted with a 2x2 or 3x3 elastic band, so the sum of the loops should be a multiple of 4 or 6. The loops are evenly distributed over 4 knitting needles and the pattern is knitted until the desired collar length is reached. From this point, increases on the collar begin.

Adding loops is done alternately to the left and right of the front loops of knitting in every 3 rows. The increase in loops occurs due to knitting two from one purl loop. The procedure is carried out until the required size of the bib is achieved. After this, the loops on the fabric are closed. The edge is decorated with a strip of single or double crochets, teeth.

Women's models and knitted collars for girls are decorated with openwork patterns, ruffles, fringes.

Any woman, even one who is just starting to knit, can make a beautiful collar with her own hands using a pattern and descriptions. It is important to choose a suitable pattern with a description and arm yourself with patience. After mastering the knitting technology on simple models, you can move on to more complex patterns, show your imagination and experiment.

Video: knitted bib. Pattern and description for women

How to knit an openwork collar, watch the video:

https://www.youtube.com/watch?v=SkYQdKB7Lcg

Detailed description of knitting a collar with knitting needles: