DIY Basket from Newspaper Tubes. Master Class for Beginners Step by Step, Photos

Those who like to make their own crafts should pay attention to weaving baskets from newspaper tubes. This entertaining hobby is within the power of even beginners, requires minimal costs, and the resulting products have a very attractive appearance and are indistinguishable from natural ones.

Necessary tools and materials for work

To make a basket from newspaper tubes with your own hands, you will need the following materials:

• old newspapers, magazines or advertising leaflets;
• scissors;
• all-purpose glue or glue stick;
• stationery knife;
• brush and water-based stain;
• cardboard or thick paper for making the bottom;
• scotch;
• an oblong knitting needle with a diameter of 2.5 mm or a thin skewer for shish kebab;
• clamps for secure fixation;
• container for diluting paint;
• ruler;
• pencil;
• varnish;
• weight for oppression.

How to make newspaper tubes

You can make a paper vine as follows:

• cut strips of 7-10 x 30 cm from the original material using a stationery knife;
• place the strip vertically and begin to twist it diagonally using a knitting needle located at the bottom left at an angle of 30 degrees. Having reached the end, you need to glue the corner to the base of the workpiece;
• pull out the knitting needle and leave the tubes to dry for 15-25 minutes;
• When twisting the bundles, it is advisable to make one end slightly wider than the other to lengthen them during the work process.

There is an even simpler version of making newspaper vines without twisting. You need to cut strips, as for forming tubes. And fold them several times lengthwise to form edgings of equal width. They can become material for a regular wickerwork, which will serve as the bottom of the basket.

Coloring the tubes

It is easy to paint a basket made of newspaper tubes with your own hands. You can paint both the finished product and the paper blanks.

To ensure durability, the created craft must be thoroughly soaked in PVA glue and allowed to dry.

It is better to dilute it with a small amount of water and apply with a brush. Then paint with acrylic paint or stain in several layers for an even shade. If desired, you can add different dyes or coloring paste. To get an even tone, you must first cover it with any product that has a coloring pigment: brilliant green, iodine, food coloring, gouache, tonic.

It is better to paint the newspaper blanks before starting work, because the unpainted gaps will not be visible. Use a special dye for fabric, acrylic water-based polymers, stain and food coloring agents. The stain is suitable for painting white tubes, they become similar to natural vine. The main shades are oak, coffee, mahogany and walnut.

To paint long blanks, you need to make a device from a large diameter polypropylene pipe.

Both ends must be cut and a plug (a plastic jar) must be glued to one of them with PVA glue, which will prevent the liquid from leaking out.

Then you need to pour the dye into the pipe, just a little short of the top, and place it on a special stand.

Next, take a few tubes and dip them into the solution. After soaking, they should be pulled out and immersed in the dyeing liquid with the other side. During the dyeing process, it is advisable to add emulsion to the container for good dyeing of the original material. Finally, all the blanks are laid out on a flat place and dried in the shade in the air.

Short strands are dyed in a bottle with a spacious neck. It is necessary not to fill the container with dye completely. Then lower several tubes into it and shake for uniform dyeing, after which they are turned over and the maneuver is repeated. Lay out on a smooth surface, dry and dye a second time to acquire a rich color.

To prevent the blanks from getting wrinkled, place a piece of thick paper around the circumference of the bottle or pipe.

Methods of weaving from newspaper tubes

A do-it-yourself basket made from newspaper tubes can be woven in two ways: solid and openwork.

In addition, there are different types of weaving, the main ones of which are:

1. Simple weaving. Consists of making a frame from rigid paper tubes. First, the narrow end of the workpiece is secured to one of the twigs of the frame and is braided with newspaper vines through one around the remaining parts of the frame at the back and front. You can use several vines and alternate the braiding through 1-3 twigs of the base.
2. Layered weaving. Allows you to create a dense and reliable craft. It is necessary to wrap the cord around the first four supports and leave it sticking out to the side. Place another bundle near the last braided stand and braid the next 4 parts of the frame with it. It is necessary to add new tubes until the place from which the wrapping began is reached.
3. Openwork weaving. The technique is chosen based on the pattern intended to be obtained: columns, diamonds, stars. Most often, this type of weaving serves as a decoration for other types of work, forming carved holes.
4. Rope weaving (spiral). The principle is to twine the vines not only around the supports, but also to intertwine them with each other. For a simple design, take two tubes and weave the first support from behind and the second from the front. Do the next support the other way around, and the third one, like the first one. Then alternate in the same sequence.

Weaving baskets of different shapes

Baskets made of newspaper tubes have different shapes. Even beginners can weave various configurations with their own hands.

Square basket

Sequence of making a square basket:

1. You should start by forming the bottom. To do this, take a cardboard strip and fold it in half. Punch holes in the cardboard at a distance of no more than 2 cm. Insert an extended "working cord" into the resulting holes.
2. The long vine should be woven near the cardboard. Having reached the edge, make a turn and weave in the opposite direction. To extend the "working cord" it is necessary to glue paper blanks. The width of the bottom may become narrower, and the required size should be adjusted.
3. Then the side walls of the braid are formed. You need an elongated newspaper rope, which is folded in half and both ends are threaded through the bottom. The tails that appear from the bottom must be bent upwards and secured. The "working cord" must be made of the desired size depending on the required height.
4. To fix the sides, you need to place a heavy object in the center, similar to the shape of the future basket. Then attach the frame tubes to it using an elastic band.
5. Start weaving from the bottom of the craft. Using a long piece, weave it into one side, alternating the placement of vertical strands, placing them at the back and in front.
6. At the beginning of the work, the end of the “working cord” remains, which can later be used as one of the components of the frame.. It allows you to form an odd number of vertical blanks. After the next row, the unoccupied edge should be braided. The procedure for weaving the side panels is carried out in a circle until you get a basket of the required size.

Rectangular basket

To form the bottom of a rectangular basket, you need to cut a template of the desired size out of cardboard, place it along the edge of the twisted tube, and secure the structure with clothespins. Then place newspaper blanks across the base so that each strand goes from below or above the base in turn, and adheres to the desired weaving density.

For some time, the craft should be covered with another paper cord and secured with clamps. The bottom will look like a comb, and then it is necessary to weave new blanks, observing the checkerboard pattern and forming the desired density. If the bottom becomes strong enough, you can remove the clothespins, since it can hold its shape on its own.

When the base is woven, stripes similar to rays remain, which will be used as the basis of the frame in the future, and with their help you can form frame walls. If the tube ends, you need to glue a new one. When decorating the edge, unnecessary ends are cut off and glued inside.

Punnet

To create a round-shaped product using the rope method, you need to follow these steps:

1. Take six newspaper strips and use a clothespin to make a solid surface.
2. Repeat this manipulation again and fold both parts crosswise.
3. Then include the paper vine in the work. Fold the workpiece in half and place its tip in the place where the cross is formed.
4. Next, weave a circular bottom. The working cord must be bent at each turn, which is done at an angle of 90 degrees. This maneuver, forming a ring, should be repeated 4 times, after which it is fixed with clamps.
5. The sides are woven in pairs. Place an oblong double paper vine exactly under the created bottom. The ends of the paired bundles should be secured to the basket.

Oval basket

An easy way to make a basket:

• To create the bottom, you need to take several newspaper pieces and weave them together in the shape of an oval.
• fasten them together by tying them together
• Having formed the base, it is necessary to weave using the usual method.
• Having made the required diameter of the bottom, wrap it and lift the tubes upward.
• Secure the strands with clamps and continue weaving.
• After finishing the work, secure the edges in the usual way.

Corner basket

When weaving a corner craft from newspaper bundles, it is advisable to follow these rules:

• To make the racks, it is advisable to use a vine from a whole sheet of paper for printing or use magazine source material. Soft blanks will not be able to withstand the wickerwork.
• When designing a basket, to form a uniform bottom, you should put a load on it, paying special attention to the corners of the product.
• For painting, it is necessary to accurately calculate the required amount of acrylic coating, because if you add another shade, the color will be far from ideal.

Master class simple basket from newspaper tubes

A simple model of a basket made from newspaper tubes is created with your own hands in the following way:

1. Using a knitting needle, twist 30 strands of newspaper strips, 10 cm wide.
2. Using a can, cut out 2 circles from cardboard. Flatten the tubes for the frame on one edge by 3 cm and glue them to one of the circles with the flattened side.
3. Glue the second circle on top of the first one so that the ends of the paper cords are between them. Raise the blanks up and secure with an elastic band.
4. Next, take the newspaper edge flattened on one side and place it behind the tube next to it on the right, pulling the edge further and bringing it out in front of the next paper strip. To form the bottom row, alternate the blanks in this way, inserting others into the hole when they are finished.
5. Weave to the desired level, then trim off the excess ends and treat the basket with glue.

Complex Basket from Newspapers. Step-by-Step Instructions

A low practical basket is made in this way:

1. For the bottom you will need 13 newspaper tubes. 5 of them need to be placed side by side, and the remaining 8 need to be laid out crosswise on top perpendicularly.
2. Next, we braid the top in the form of a pigtail with one paper blank.
3. When the paper rope runs out, it should be extended.
4. Weave the bottom in this way until it reaches the required size.
5. Once you have finished forming the base, you should bend the tubes upward and braid them again.
6. Having created 4 rows of walls of the future product, fix the main strips on the sides with clothespins and then form the basket. The whole craft is braided with two blanks.
7. At the end, make the edge with a figured volumetric weave.
8. Hide and glue the excess ends.
9. Remove the clothespins, paint and varnish the basket.

Edge decoration

When the basket is the right height, it is advisable to hide the ends of the tubes that form the frame, secure and hide the workpiece. To do this, you will need an extended knitting needle. It should be threaded through the hole near the stand in the middle for 3 rows. Repeat the same action in the other direction, then throw the stand on it and thread it down.

This will ensure that all the posts can bend. Once the work is completed, you can get the finished edge. Grease the places where the posts hit with glue and let it dry, then cut off all the extra ends of the blanks. Carefully hide the cuts among the newspaper vines.

How to make a pen

The easiest way to make a basket handle:

1. You will need 4 long flexible vines. To make them elastic, you should spray them with a spray bottle.
2. Use clothespins to mark the places on the basket where the handle will be attached.
3. Thread the tubes through the rows already made so that they are of equal length.
4. Having obtained two rows from four strands, you should cross the parts. As a result, an even braid-curl should be formed.
5. Make spirals until you get a handle of the desired length.
6. Pass the braid through the braided model.

Lid for a basket made of newspapers

The lid for the craft is made similar to the bottom, and should be slightly larger than the top of the original.

To make it you need:

• in the side surface of strong and smooth cardboard you need to make small indentations with a knife;
• thread a paper vine through the holes on each side;
• wrap the edges of the product, bending one element after another;
• Finally, hide the free edges under the lid;
• for handles, insert 2 pairs of tubes along the two upper edges;
• stretch them towards the middle, bend and intertwine with each other;
• coat the edges with glue and secure with clothespins;
• To make them look neat, they should be coated with PVA again and wrapped with paper.

Decorating a Newspaper Basket

You can decorate a basket made of newspaper tubes beautifully with your own hands in the following ways:

1. By repainting. It is advisable to take moisture-resistant acrylic paints. The best option is a two-layer coating, while the color saturation can be controlled by covering the craft with additional layers. You can design a multi-colored basket with several shades, or apply any thematic images to the surface of the basket.
2. Using multi-colored satin ribbons. To do this, you need to leave space for them during the weaving process. It is advisable not to weave the craft at a level that corresponds to the width of the decorative components. After completing the formation of the basket, you just need to lay the ribbon between the paper blanks and secure it with glue or threads.

   

3. Pasta in the form of various figuresBefore gluing, they must be treated with a golden or metallic spray.
4. Flowers made of leather. To make them, you need to take artificial material and cut out teardrop-shaped parts for the petals and oval, sharp-angled parts for the leaves. To bend the components of the flower, it is advisable to hold them over the fire with tweezers.
5. Decorated using decoupage technique the crafts will look like a real masterpiece. To fix the image, use varnish.

A basket made of newspaper tubes, created with your own hands, will be a great decoration for any room, be it a bathroom, living room or dining room. The main thing is to create with positive thoughts and love. The creative process of making newspaper crafts helps relieve stress after everyday life and switch attention, and the created models will decorate any interior.

Video on how to make a basket from newspaper tubes with your own hands

How to make a basket from newspaper tubes with your own hands, watch the video:

Weaving from newspaper tubes, see step-by-step instructions in the video: